1929 Cabriolet door window parts

[Steve Plucker]

I have a friend who has an mid 1929 Cabriolet. He is minus all the parts to complete the door window assemblies, right and left.

Are these parts avaliable through the repro parts houses?

Just what all is included in this assembly to complete this part of the restoration?

Thanks.

Pluck

[Tacoma Bob]

Hi Pluck. For clarity do you mean window risers (regulators)?

[Steve Plucker]

Originally Posted by Tacoma Bob

Hi Pluck. For clarity do you mean window risers (regulators)?

Yes and everything else Robert.

Pluck

[Tacoma Bob]

PM sent

[Oldbluoval]

I make the replacement window surround in stainless (or mild steel) with bottom mounting but not the regulators nor the guides that go in the doors. If that helps any
[email protected]

[Steve Plucker]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Oldbluoval

I make the replacement window surround in stainless (or mild steel) with bottom mounting but not the regulators nor the guides that go in the doors. If that helps any
[email protected]

Thanks...I will let my friend know.

[Oldbluoval]

To the best of my knowledge no one makes the special slides in the door that the window frames ride/guide in
Scarce puppies!

[jw hash]

the window regulators and door latches in the 68Aand B`s all the way up to mid 30 are the same as the Briggs straight window four door.