|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-17-2021, 02:52 PM | #1 |
Junior Member
Join Date: Feb 2021
Location: Lakemont, Ga. (N.E. Ga)
Posts: 5
|
N.E. Ga. Mechanic sought
I accepted custody of a well loved and maintained mostly original 1939 Mercury fordor about 6 months ago. It is generally very reliable and I have put about 1,400 miles on it since acquiring.
I am looking for a quality mechanic in extreme N.E. Ga. or nearby N.C. or S.C.. I'm about 30 miles from both. |
08-17-2021, 03:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,960
|
Re: N.E. Ga. Mechanic sought
Charlotte NC help any?
|
Sponsored Links (Register now to hide all advertisements) |
|
08-17-2021, 03:51 PM | #3 |
Senior Member
Join Date: Feb 2017
Location: Dothan, AL
Posts: 325
|
Re: N.E. Ga. Mechanic sought
You might reach out to Regional Early Ford V8 Club, there is one in Chamblee, Ga. There is another Regional Club in Chapin, SC.
|
08-17-2021, 07:48 PM | #4 |
Senior Member
Join Date: Dec 2015
Posts: 547
|
Re: N.E. Ga. Mechanic sought
I do not know any Flathead guys up around Lake Rabun. There is a place off 115 I think east of Cleveland that has a lot of old trucks parked out front but not sure if it’s a garage or not. What do you need done?
JB |
08-17-2021, 08:43 PM | #5 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 3,260
|
Re: N.E. Ga. Mechanic sought
I’m in Alabama
|
08-18-2021, 06:25 PM | #6 | |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,408
|
Re: N.E. Ga. Mechanic sought
Sponsored Links (Register now to hide all advertisements)
Quote:
He is in Fitzgerald. |
|
08-18-2021, 06:54 PM | #7 |
Member Emeritus
Join Date: May 2010
Location: Fitzgerald, Georgia
Posts: 2,204
|
Re: N.E. Ga. Mechanic sought
Thanks Pete, but I am around 300 miles south of the original poster. Of course if verbal assistance is sought I would try to help.
|
08-18-2021, 09:16 PM | #8 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,179
|
Re: N.E. Ga. Mechanic sought
|
08-24-2021, 02:22 PM | #9 | |
Junior Member
Join Date: Mar 2017
Location: Royston, Georgia
Posts: 5
|
Re: N.E. Ga. Mechanic sought
Quote:
I have a 1940 Delux coup with a 59 AB engine installed. Would like to have a 3.54 ration ring and pinion installed. I drive this 40 often. Dick in Royston, GA. [email protected] |
|
08-24-2021, 08:28 PM | #10 |
Member Emeritus
Join Date: May 2010
Location: Fitzgerald, Georgia
Posts: 2,204
|
Re: N.E. Ga. Mechanic sought
Sending email response.
|
08-26-2021, 05:31 PM | #11 |
Junior Member
Join Date: Feb 2021
Location: Lakemont, Ga. (N.E. Ga)
Posts: 5
|
Re: N.E. Ga. Mechanic sought
It has begun to "stumble" when light or heavy acceleration under load. it takes anywhere from 8 to 20 miles to start it. The ambient temps have been relatively mild (80-87F). I have done all that I can think of to do (minor things): cleaned up all elec connections, cables, ground straps, changed plugs (which seemed to resolve only to have it resurface a day and 20 miles later. The plugs I removed looked textbook perfect.) I suspect coil for no good reason.
|
08-26-2021, 06:07 PM | #12 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,963
|
Re: N.E. Ga. Mechanic sought
condenser, even the new ones are about half junk
|
08-26-2021, 07:17 PM | #13 |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,408
|
Re: N.E. Ga. Mechanic sought
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|