Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-05-2014, 11:07 AM   #1
Ed Solari
Senior Member
 
Join Date: May 2010
Posts: 217
Default 33/34 rumble panel install

In the space between the triangular piece and the rear quarter flange (see pix red arrow) ...are there a spacers in OEM to match the space created by the U shaped rain gutter (see pix blue arrow).

Does anyone know other source for the panel with the half round (see other pix) other than Howells or Steve's real steel. I do not think I can find a good OEM one and I have shape issues with the repo

Thanks
Ed Solari
Attached Images
File Type: jpg water dam 6.jpg (40.2 KB, 58 views)
File Type: jpg rumble panel.jpg (5.7 KB, 44 views)
Ed Solari is offline   Reply With Quote
Old 12-05-2014, 11:36 AM   #2
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: 33/34 rumble panel install

Another source (the one I use) is:

R&J Enterprises
6034 302nd Rd, Arkansas City, KS 67005
(620) 441-0032

Can't comment on shape verses Howells or Steve's, R & J fab most of their own panels, but are also a supplier for a lot of the other sources, so?

You are aware that there are several other parts that go into this area? Not sure what you are calling a spacer.
Attached Images
File Type: jpg 33 Trunk Detail.jpg (67.0 KB, 31 views)
File Type: jpg 34 Trunk Detail 3.jpg (71.4 KB, 30 views)

Last edited by JSeery; 12-05-2014 at 11:42 AM.
JSeery is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-05-2014, 01:31 PM   #3
David J
Senior Member
 
David J's Avatar
 
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
Default Re: 33/34 rumble panel install

Hey Ed , Your first pic is right other than the stops and dam are not there . Other post is a trunk setup and is not the same . No clue on a better inner panel and used ones in good shape are RARE to say the least . Pics are 33's but are the same as 34 . Dave
Attached Images
File Type: jpg SAM_0191.jpg (114.0 KB, 39 views)
File Type: jpg IMG_0014.JPG (49.4 KB, 33 views)
David J is offline   Reply With Quote
Old 12-05-2014, 03:55 PM   #4
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: 33/34 rumble panel install

Thanks David, I read the post and not the title!
JSeery is offline   Reply With Quote
Old 12-05-2014, 04:56 PM   #5
FlatheadTed
Senior Member
 
FlatheadTed's Avatar
 
Join Date: May 2010
Location: Auckland
Posts: 4,691
Send a message via AIM to FlatheadTed
Default Re: 33/34 rumble panel install

Ed I think the lower part of 1/4 flange has a kink in it to compensate for the gap in the three layers .
__________________
http://www.flatheadted.com


Flathead Ted brake Floaters ,
FlatheadTed is offline   Reply With Quote
Old 12-05-2014, 06:09 PM   #6
David J
Senior Member
 
David J's Avatar
 
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
Default Re: 33/34 rumble panel install

Sponsored Links (Register now to hide all advertisements)
Question ended up being about the layering order of components down below the deck opening . The reinforcement for the bolts and edge goes between the quarter lip and the triangle piece . The gutter goes between the quarter lip and triangle piece also so if properly assembled there is no step or gap . I answered the wrong question myself to start with .
David J is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:07 AM.