The Ford Barn

1930.68B · 11-30-2017, 08:54 PM

I have the drawings by Steve Watrous for the lower front floor board but it appears to have missing dimension. I have drawings form other sources but they are all missing this dimension.
Does anyone have the dimension that is hi-lited on the attached dwg.
Thanks

FordTudor1931 · 11-30-2017, 09:31 PM

If you cut it to 5 1/2 inches you will be really close. Here is the idea: The total width is 16 7/8. Looking at the left side, there are two measurements, one of 4 19/64 and one of 7 5/64, which appears to be very close to the line you are looking for. 4 19/64 + 7 5/64 = 11 24/64 = 11 3/8. With the total of 16 7/8 - 11 3/8 you end up with a 5 1/2. Which looks like where you would like to be.

Larry Jenkins · 11-30-2017, 09:36 PM

Quote:

Originally Posted by 1930.68b

i have the drawings by steve watrous for the lower front floor board but it appears to have missing dimension. I have drawings form other sources but they are all missing this dimension.
Does anyone have the dimension that is hi-lited on the attached dwg.
Thanks

6 9/16" (6.5625)

Gary WA · 11-30-2017, 10:23 PM

5 11/16's

Brentwood Bob · 12-01-2017, 12:50 AM

My notes agree with #4.
5 11/16.

maako · 12-01-2017, 02:12 AM

Sponsored Links (Register now to hide all advertisements)

It is 5.5 inches all the numbers you need are on the left side of the drawing you posted.

Mike V. Florida · 12-01-2017, 04:06 AM

Quote:

Originally Posted by Gary WA

5 11/16's

Tough to beat the factory drawing.

1930.68B · 12-01-2017, 09:25 AM

In the first drawing, lay a straight edge along the witness line at the top of the 4 19/64" dimension line and does not line with cut out in the center of the floor board.
Mike, thanks for the view showing the 5 11/16" dim. I'll add it to my drawing.

BILL WILLIAMSON · 12-01-2017, 05:28 PM

Just cut a cardboard pattern that fits your car & make floor boards accordingly!
Bill Scissorhands

11-30-2017, 09:31 PM	#2
FordTudor1931 Member Join Date: Nov 2015 Location: Grand Haven, MI Posts: 95	Re: Floor board drawings If you cut it to 5 1/2 inches you will be really close. Here is the idea: The total width is 16 7/8. Looking at the left side, there are two measurements, one of 4 19/64 and one of 7 5/64, which appears to be very close to the line you are looking for. 4 19/64 + 7 5/64 = 11 24/64 = 11 3/8. With the total of 16 7/8 - 11 3/8 you end up with a 5 1/2. Which looks like where you would like to be.

12-01-2017, 12:50 AM	#5
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,234	Re: Floor board drawings My notes agree with #4. 5 11/16.

12-01-2017, 02:12 AM	#6
maako Member Join Date: Nov 2014 Location: Japan Posts: 60	Re: Floor board drawings Sponsored Links (Register now to hide all advertisements) It is 5.5 inches all the numbers you need are on the left side of the drawing you posted.

12-01-2017, 09:25 AM	#8
1930.68B Senior Member Join Date: Mar 2014 Location: Canton, IL Posts: 186	Re: Floor board drawings In the first drawing, lay a straight edge along the witness line at the top of the 4 19/64" dimension line and does not line with cut out in the center of the floor board. Mike, thanks for the view showing the 5 11/16" dim. I'll add it to my drawing.

12-01-2017, 05:28 PM	#9
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: Floor board drawings Just cut a cardboard pattern that fits your car & make floor boards accordingly! Bill Scissorhands __________________ "THE ASSISTANT GURU OF STUFF"