The Ford Barn

slick40 · 03-18-2018, 08:42 PM

I have window frame screws out upholstery loose, window crank, door latch handle off, arm rest is still hooked on, can't budge it how does window frame come loose? Thanks for some help. Gene

4dFord/SC · 03-18-2018, 09:24 PM

If you mean the garnish molding, once the screws are removed, it should come off with a good jerk.

slick40 · 03-19-2018, 08:04 AM

The top part came loose but the lower half is tight vent window and all. Gene

Darrell S · 03-19-2018, 08:27 AM

Quote:

Originally Posted by slick40

The top part came loose but the lower half is tight vent window and all. Gene

Is the rubber molding around the vent window stuck to the door?

TJ · 03-19-2018, 08:28 AM

Sponsored Links (Register now to hide all advertisements)

Pull the top outward past the door frame and lift it upward. It should come right out. Then make sure all the door panel clips are loose and then pull up on the panel so it clears the slot for the arm rest.

03-18-2018, 08:42 PM	#1
slick40 Junior Member Join Date: Oct 2010 Location: iowa Posts: 8	Broken door latch on 40 Tudor I have window frame screws out upholstery loose, window crank, door latch handle off, arm rest is still hooked on, can't budge it how does window frame come loose? Thanks for some help. Gene

03-18-2018, 09:24 PM	#2
4dFord/SC Senior Member Join Date: May 2010 Location: Columbia, SC Posts: 1,579	Re: Broken door latch on 40 Tudor If you mean the garnish molding, once the screws are removed, it should come off with a good jerk.

03-19-2018, 08:04 AM	#3
slick40 Junior Member Join Date: Oct 2010 Location: iowa Posts: 8	Re: Broken door latch on 40 Tudor The top part came loose but the lower half is tight vent window and all. Gene

03-19-2018, 08:28 AM	#5
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,037	Re: Broken door latch on 40 Tudor Sponsored Links (Register now to hide all advertisements) Pull the top outward past the door frame and lift it upward. It should come right out. Then make sure all the door panel clips are loose and then pull up on the panel so it clears the slot for the arm rest.