The Ford Barn

My1930ModelA · 06-03-2015, 05:02 AM

I'm replacing my speedometer cable and have run into a problem....1930 Town Sedan with an oval Northeast speedo. The threads on my new cable on the speedometer end are male threads, but my Northeast speeometer requires female threads on the cable housing. Has anyone run into this?

Thanks
Mark

Mark in MT · 06-03-2015, 08:53 AM

Sponsored Links (Register now to hide all advertisements)

The oval Northeast speedometer uses a cable assembly that is unique to that speedometer. Those units are rare, I only have one for parts in the shop and no cables. When I get to the shop I will check the size of the square drive of the input, you may be able to use a "standard " inside cable in your housing.

06-03-2015, 05:02 AM	#1
My1930ModelA Member Join Date: Feb 2015 Location: New Philadelphia, Ohio Posts: 32	Speedometer Cable question I'm replacing my speedometer cable and have run into a problem....1930 Town Sedan with an oval Northeast speedo. The threads on my new cable on the speedometer end are male threads, but my Northeast speeometer requires female threads on the cable housing. Has anyone run into this? Thanks Mark

06-03-2015, 08:53 AM	#2
Mark in MT Senior Member Join Date: May 2010 Location: Western MT Posts: 214	Re: Speedometer Cable question Sponsored Links (Register now to hide all advertisements) The oval Northeast speedometer uses a cable assembly that is unique to that speedometer. Those units are rare, I only have one for parts in the shop and no cables. When I get to the shop I will check the size of the square drive of the input, you may be able to use a "standard " inside cable in your housing. __________________ Mark in MT Always looking for another opportunity to be wrong.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode