Clutch disc 57 Ford

[PKW181]

Anyone know where I can find a 23 Spline 10.5 clutch disc?

Thank you in advance for any help.

[paul2748]

Centerforce??

[Dobie Gillis]

If you have one that needs relining take it to a big truck clutch and brake shop.

[rotorwrench]

Is this what you are looking for. http://www.ebay.ca/itm/NOS-1960-62-F...FZCk~H&vxp=mtr

[PKW181]

Thanks everyone.
Going to try to find a 312 flywheel that takes an 11" pressure plate as mine will only accept a 10.5. Had bought a 3 speed o/d replacement Trans, but the input shaft has a 23 spline.
Any ideas where to find a new or used flywheel ? Summit is trying to locate one, but no luck yet.

[Lanny]

Sponsored Links (Register now to hide all advertisements)

Just curious, is this clutch and flywheel going to be used in a heavy '57 vehicle, that you
would want a steel flywheel, or is it a lighter vehicle that you might want alum flywheel ?






.

[PKW181]

The car is a basic 57 Fairlane 500 2 door h/t, will be using it for a semi d/d and cruising around.

[paul2748]

Try the TBird parts guys that also sell used parts. All TBirds (std shift) used 11 inch clutches.

Hills restorations, CASCO, Larry's,

Other guys:

Adrian 570-709-0823 [email protected]
Tony - Tony's Classics 515-263-3606

Originally Posted by PKW181

Thanks everyone.
Going to try to find a 312 flywheel that takes an 11" pressure plate as mine will only accept a 10.5. Had bought a 3 speed o/d replacement Trans, but the input shaft has a 23 spline.
Any ideas where to find a new or used flywheel ? Summit is trying to locate one, but no luck yet.

[Sid]

To my knowledge all 312's were 11" as well as pick-up trucks with 292's. As far as a daily driver I don't think you would see much difference between a 10.5" or 11" clutch as long as it is a quality brand and not a Chinese rebuilt. I have had good luck with McLeod clutches myself. Basically you will get what you pay for.