|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
09-18-2017, 06:50 PM
|
#1 |
|
Senior Member
Join Date: Dec 2011
Posts: 180
|
oil pan drive gear
What am I doing wrong ? I have pulled the distributor. the lower shaft and side cover but cannot get the drive gear to come out. I can lift it up easily but when I get it as high as I can the tang on the bottom that goes to the oil pump will not come high enough to take out assy ? Thanks Joe B
|
|
|
|
09-18-2017, 08:27 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Austin, Texas
Posts: 925
|
Re: oil pan drive gear
Kinda have to "hold your tongue right", Joe. It will come out. Some one put it in there. Just have to get it turned right.
__________________
I noticed the harder I work the luckier I get! |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
09-18-2017, 08:31 PM
|
#3 |
|
Senior Member
Join Date: Aug 2016
Location: Alberta
Posts: 930
|
Re: oil pan drive gear
I just took mine out this afternoon. Not sure exactly HOW it came out. I know it was tight and when it came out my first thought was "I hope i can get this thing back in there".
|
|
|
|
|
09-18-2017, 08:34 PM
|
#4 | |
|
Senior Member
Join Date: Apr 2015
Location: Boise, Idaho
Posts: 1,578
|
Re: oil pan drive gear
Sponsored Links (Register now to hide all advertisements)
Quote:
Here is an older thread with some suggestions for when the time comes to put it back in... https://www.fordbarn.com/forum/showthread.php?t=90878 .
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62 |
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 02:17 AM.