Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-10-2017, 02:37 PM   #1
hb32
Senior Member
 
hb32's Avatar
 
Join Date: Aug 2012
Location: Nanaimo Vancouver Island B.C. Canada
Posts: 1,056
Default Model A vs early 32 axle shafts

Gathering parts for the rebuild and am wondering what to look for in the inspection of the axle shafts. I am reading the info by tom Endy as well.
Also, is their a difference in the shafts of the A compared to the early 32 ?
hb32 is offline   Reply With Quote
Old 09-10-2017, 07:19 PM   #2
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,017
Default Re: Model A vs early 32 axle shafts

The best way to inspect the axle shafts is with a magna flux machine designed for that purpose. You want to find any cracks that are starting to form. Once a crack starts it will grow until there is a failure. They are usually found on the inboard end of the keyway. The most common cause of the cracks is the axle nut not being tight enough. The Green Bible says axle shaft B 4235 fits 28 to 32 so you should be ok.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-11-2017, 10:51 AM   #3
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,066
Default Re: Model A vs early 32 axle shafts

Also look at the area where the little seal rides. If worn, just shim under the seal to space it out a little. The seal faces outward to keep grease from flowing into the housing when lubing the wheel bearing. Not a critical area.
Jim Brierley is offline   Reply With Quote
Old 09-14-2017, 09:44 AM   #4
hb32
Senior Member
 
hb32's Avatar
 
Join Date: Aug 2012
Location: Nanaimo Vancouver Island B.C. Canada
Posts: 1,056
Default Re: Model A vs early 32 axle shafts

Thanks for the info.
hb32 is offline   Reply With Quote
Old 09-14-2017, 10:53 AM   #5
H. L. Chauvin
Senior Member
 
Join Date: May 2010
Posts: 4,179
Default Re: Model A vs early 32 axle shafts

Sponsored Links (Register now to hide all advertisements)
FWIW:

At vintage vehicle swap meets and/or on ebay; beware of beautifully "Painted" axles which totally hides the cracks.

A later application of paint remover on "Painted" axles will make a Model A owner either laugh or cry.

Last edited by H. L. Chauvin; 09-14-2017 at 10:53 AM. Reason: typo
H. L. Chauvin is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:35 PM.