The Ford Barn

aermotor · 09-14-2017, 06:52 PM

Bought a "running chassis" that isn't exactly running yet. The flywheel wheel housing was a different color so suspicion was in order. The housing was run out and an extra .025 at the 9 o'clock position. Removed housing and no gasket or shims. The crankshaft run-out was good. Put it back together properly and see what I have or have the housing measured and/or surfaced first?

John

Wick · 09-15-2017, 04:37 AM

Put it together and fire it up and see what you have. Motor could be a knocker or a good runner.
I've done this many times and it can save you Alot of time and energy.

aermotor · 09-15-2017, 08:07 PM

Sponsored Links (Register now to hide all advertisements)

Bump T T

Any other opinions?

Quote:

Originally Posted by aermotor

Bought a "running chassis" that isn't exactly running yet. The flywheel wheel housing was a different color so suspicion was in order. The housing was run out and an extra .025 at the 9 o'clock position. Removed housing and no gasket or shims. The crankshaft run-out was good. Put it back together properly and see what I have or have the housing measured and/or surfaced first?

John

09-14-2017, 06:52 PM	#1
aermotor Senior Member Join Date: Mar 2015 Location: Greenville, SC Posts: 1,099	What next Bought a "running chassis" that isn't exactly running yet. The flywheel wheel housing was a different color so suspicion was in order. The housing was run out and an extra .025 at the 9 o'clock position. Removed housing and no gasket or shims. The crankshaft run-out was good. Put it back together properly and see what I have or have the housing measured and/or surfaced first? John

09-15-2017, 04:37 AM	#2
Wick Senior Member Join Date: May 2010 Location: Gwynn's Island Va Posts: 1,386	Re: What next Put it together and fire it up and see what you have. Motor could be a knocker or a good runner. I've done this many times and it can save you Alot of time and energy.