|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-19-2017, 06:05 PM | #1 |
Member
Join Date: May 2011
Location: Northern Arizona
Posts: 85
|
Clutch disc 57 Ford
Anyone know where I can find a 23 Spline 10.5 clutch disc?
Thank you in advance for any help. |
09-19-2017, 07:26 PM | #2 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: Clutch disc 57 Ford
Centerforce??
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
Sponsored Links (Register now to hide all advertisements) |
|
09-20-2017, 10:38 AM | #3 |
Senior Member
Join Date: May 2012
Location: Middle TN
Posts: 1,060
|
Re: Clutch disc 57 Ford
If you have one that needs relining take it to a big truck clutch and brake shop.
|
09-20-2017, 11:05 AM | #4 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,426
|
Re: Clutch disc 57 Ford
Is this what you are looking for. http://www.ebay.ca/itm/NOS-1960-62-F...FZCk~H&vxp=mtr
|
09-20-2017, 09:01 PM | #5 |
Member
Join Date: May 2011
Location: Northern Arizona
Posts: 85
|
Re: Clutch disc 57 Ford
Thanks everyone.
Going to try to find a 312 flywheel that takes an 11" pressure plate as mine will only accept a 10.5. Had bought a 3 speed o/d replacement Trans, but the input shaft has a 23 spline. Any ideas where to find a new or used flywheel ? Summit is trying to locate one, but no luck yet. |
09-20-2017, 10:27 PM | #6 |
Senior Member
Join Date: May 2010
Location: Mn
Posts: 2,411
|
Re: Clutch disc 57 Ford
Sponsored Links (Register now to hide all advertisements)
would want a steel flywheel, or is it a lighter vehicle that you might want alum flywheel ? .
__________________
If mama ain't happy, ain't nobody happy. But if daddy ain't happy...RUN |
09-21-2017, 10:03 AM | #7 |
Member
Join Date: May 2011
Location: Northern Arizona
Posts: 85
|
Re: Clutch disc 57 Ford
The car is a basic 57 Fairlane 500 2 door h/t, will be using it for a semi d/d and cruising around.
|
09-21-2017, 07:59 PM | #8 | |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: Clutch disc 57 Ford
Try the TBird parts guys that also sell used parts. All TBirds (std shift) used 11 inch clutches.
Hills restorations, CASCO, Larry's, Other guys: Adrian 570-709-0823 [email protected] Tony - Tony's Classics 515-263-3606 Quote:
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
|
09-21-2017, 09:37 PM | #9 |
Senior Member
Join Date: May 2010
Location: Rathdrum Idaho
Posts: 737
|
Re: Clutch disc 57 Ford
To my knowledge all 312's were 11" as well as pick-up trucks with 292's. As far as a daily driver I don't think you would see much difference between a 10.5" or 11" clutch as long as it is a quality brand and not a Chinese rebuilt. I have had good luck with McLeod clutches myself. Basically you will get what you pay for.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|