|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-22-2021, 08:48 AM | #1 |
Member
Join Date: Dec 2012
Posts: 51
|
Take Original Coil and Place New Coil Inside
Has anyone tried to take an original ignition coil shell and put a new coil inside to maintain the original look? I was looking if split the back of the original coil or try to cut out the bottom.
Issue is that the new coil are of a diameter that they don't slide inside. Has anybody tried to this that could provide some thoughts? I tried the search but didn't find anything. Thanks Ron |
03-22-2021, 08:50 AM | #2 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,350
|
Re: Take Original Coil and Place New Coil Inside
This got discussed last month:
https://www.fordbarn.com/forum/showt...4631&showall=1 |
Sponsored Links (Register now to hide all advertisements) |
|
03-22-2021, 10:25 AM | #3 |
Member
Join Date: Dec 2012
Posts: 51
|
Re: Take Original Coil and Place New Coil Inside
Sponsored Links (Register now to hide all advertisements)
Ron |
|
|
Sponsored Links (Register now to hide all advertisements) |
|