Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-29-2020, 12:10 PM   #21
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 7,125
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

Quote:
Originally Posted by hop up View Post
49-53 generator with strap mount and early edmunds with early style gennie
On your first picture, we can't see the manifold well enough to determine what it is. Your picture does show that the generator is at least 8" long, so it looks like it would be questionable if it would fit in the space shown by the O/P.

On the second picture, you do see that the 8BA manifold pictured has the "Edmunds" script in front of the carbs don't you? There's a lot less room on the O/P's manifold. As I said, I'm not sure, but I'd sure check it out.
tubman is offline   Reply With Quote
Old 12-29-2020, 01:43 PM   #22
VeryTangled
Senior Member
 
VeryTangled's Avatar
 
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 2,938
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

Quote:
Originally Posted by 10gaugemag View Post
Found this critter while cleaning in my grandpas basement yesterday.

Thanks in advance for any advice.
Welcome to the FordBarn Forums!

Nothing to add on the intake/carb piece, BUT if your grandpa had that in his basement I'd expect he had more gems like it to be discovered!

Being cautious and asking questions, as you've done in this case, is probably sensible.
__________________
-Jeff H

Have you thought about supporting the Early Ford V-8 Foundation Museum?
VeryTangled is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-29-2020, 04:24 PM   #23
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 7,125
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

Thanks for getting this thread back on track!
tubman is offline   Reply With Quote
Old 12-29-2020, 08:41 PM   #24
hop up
Senior Member
 
hop up's Avatar
 
Join Date: Jun 2010
Posts: 396
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

Both are Edmunds
__________________
Wanted flathead speed equipment Thanks
hop up is offline   Reply With Quote
Old 12-29-2020, 08:53 PM   #25
Charlie ny
Senior Member
 
Join Date: May 2010
Posts: 2,628
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

10 gauge,
I'll buy it....check your PM's
Thanks,
Charlie ny
Charlie ny is offline   Reply With Quote
Old 12-30-2020, 09:35 AM   #26
10gaugemag
Junior Member
 
Join Date: Dec 2020
Location: Cass County Mo.
Posts: 11
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Charlie ny View Post
10 gauge,
I'll buy it....check your PM's
Thanks,
Charlie ny
I did. Cannot reply/send unless I have at least 10 posts.
10gaugemag is offline   Reply With Quote
Old 12-30-2020, 10:35 AM   #27
Charlie ny
Senior Member
 
Join Date: May 2010
Posts: 2,628
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

10 gauge,
Send me an email............cas5845@yahoo.com.......
Thanks,
Charlie ny
Charlie ny is offline   Reply With Quote
Old 12-31-2020, 10:51 AM   #28
10gaugemag
Junior Member
 
Join Date: Dec 2020
Location: Cass County Mo.
Posts: 11
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

Will do Charlie ny.
10gaugemag is offline   Reply With Quote
Old 12-31-2020, 10:53 AM   #29
10gaugemag
Junior Member
 
Join Date: Dec 2020
Location: Cass County Mo.
Posts: 11
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

Quote:
Originally Posted by VeryTangled View Post
Welcome to the FordBarn Forums!

Nothing to add on the intake/carb piece, BUT if your grandpa had that in his basement I'd expect he had more gems like it to be discovered!

Being cautious and asking questions, as you've done in this case, is probably sensible.
Supposedly there were 2 intakes but only found 1 so far and I am down to not much left. Still have a shop to go through at some point this winter.
10gaugemag is offline   Reply With Quote
Old 12-31-2020, 04:17 PM   #30
10gaugemag
Junior Member
 
Join Date: Dec 2020
Location: Cass County Mo.
Posts: 11
Default Re: Edmunds manifold, Twin Stromberg 97 carbs

Quote:
Originally Posted by Charlie ny View Post
10 gauge,
Send me an email............cas5845@yahoo.com.......
Thanks,
Charlie ny
Sent.
10gaugemag is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:14 AM.