The Ford Barn

GerryAllen · 09-18-2018, 04:36 PM

Before any of you die-hards rag on me about previous threads, have tried to search info.
Putting new rear end in car, got it ready for a test drive and transmission locked in Reverse. Have taken tower out and in again and still cant get it ti shift, any suggestions would help.
Gerry Birch Bay Wa

Jacksonlll · 09-18-2018, 04:49 PM

Long shot, but your detent springs may be too long, bottoming out and preventing the shafts from moving.

Jacksonlll · 09-18-2018, 04:50 PM

Put tower in a vice and make sure it shifts ok.

Tom Endy · 09-18-2018, 07:00 PM

Hopefully you did not accidently drop a bolt down in the transmission while you had the tower off. They will hide back by the reverse idler gear, then when you shift into reverse they will jam up and do some damage.

Tom Endy.

J Franklin · 09-18-2018, 07:47 PM

With the tower off can you move the gear out of reverse?

GerryAllen · 09-19-2018, 10:48 AM

Sponsored Links (Register now to hide all advertisements)

thanks guys

mollydog · 09-19-2018, 11:51 AM

You said you put a new rear end in the car then the trouble with being stuck in reverse. Was it a rebuilt rear? Did you rebuild it with a new ring and pinion? The ring gear can be installed on the wrong side of the pinion causing only reverse!
Just a thought.

Mollydog

40 Deluxe · 09-19-2018, 12:48 PM

Quote:

Originally Posted by mollydog

You said you put a new rear end in the car then the trouble with being stuck in reverse. Was it a rebuilt rear? Did you rebuild it with a new ring and pinion? The ring gear can be installed on the wrong side of the pinion causing only reverse!
Just a thought.

Mollydog

Not quite. The car would move forward with the trans in reverse.

figment · 09-19-2018, 02:21 PM

If the ring gear is installed on the wrong side you would have 3 speeds in reverse and 1 speed forward

denniskliesen · 09-19-2018, 02:31 PM

Make sure your shifter hasn't jumped out of position between the forks.

Jacksonlll · 09-19-2018, 03:08 PM

Quote:

Originally Posted by figment

If the ring gear is installed on the wrong side you would have 3 speeds in reverse and 1 speed forward

I did this when I was 16. When we discovered what we did, I wanted to fix it before any of our friends came by, but my buddy insisted on driving it around the block in reverse. He did and we fixed it real fast. Never got caught by our friends.

katy · 09-20-2018, 09:16 AM

Quote:

Originally Posted by GerryAllen

Before any of you die-hards rag on me about previous threads, have tried to search info.
Putting new rear end in car, got it ready for a test drive and transmission locked in Reverse. Have taken tower out and in again and still cant get it ti shift, any suggestions would help.
Gerry Birch Bay Wa

Loosen off all the U joint housing bolts and see what happens

GerryAllen · 09-20-2018, 10:01 AM

Keep the ideas coming, will work through them this weekend.
Gerry Birch Bay Wa

GerryAllen · 09-20-2018, 10:38 PM

Thank you all, got it unlocked. Removed the tower, rocked the car back and forth while gently nudging on the aft gear and Walla it was free.
What a relief, thanks for your suggestions. New to Model A's, this web site and fellow club members really help us newbies with our problems.
Gerry

09-18-2018, 04:36 PM	#1
GerryAllen Senior Member Join Date: May 2018 Location: Birch Bay WA Posts: 190	Transmission locked in Reverse Before any of you die-hards rag on me about previous threads, have tried to search info. Putting new rear end in car, got it ready for a test drive and transmission locked in Reverse. Have taken tower out and in again and still cant get it ti shift, any suggestions would help. Gerry Birch Bay Wa

09-18-2018, 04:49 PM	#2
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: Transmission locked in Reverse Long shot, but your detent springs may be too long, bottoming out and preventing the shafts from moving.

09-18-2018, 04:50 PM	#3
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: Transmission locked in Reverse Put tower in a vice and make sure it shifts ok.

09-18-2018, 07:47 PM	#5
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,962	Re: Transmission locked in Reverse With the tower off can you move the gear out of reverse?

09-19-2018, 10:48 AM	#6
GerryAllen Senior Member Join Date: May 2018 Location: Birch Bay WA Posts: 190	Re: Transmission locked in Reverse Sponsored Links (Register now to hide all advertisements) thanks guys

09-19-2018, 11:51 AM	#7
mollydog Member Join Date: Jul 2014 Location: bechtelsville, pa Posts: 36	Re: Transmission locked in Reverse You said you put a new rear end in the car then the trouble with being stuck in reverse. Was it a rebuilt rear? Did you rebuild it with a new ring and pinion? The ring gear can be installed on the wrong side of the pinion causing only reverse! Just a thought. Mollydog

09-19-2018, 02:21 PM	#9
figment Senior Member Join Date: May 2010 Posts: 332	Re: Transmission locked in Reverse If the ring gear is installed on the wrong side you would have 3 speeds in reverse and 1 speed forward

09-19-2018, 02:31 PM	#10
denniskliesen Senior Member Join Date: Nov 2016 Location: SoCal Posts: 877	Re: Transmission locked in Reverse Make sure your shifter hasn't jumped out of position between the forks.

09-20-2018, 10:01 AM	#13
GerryAllen Senior Member Join Date: May 2018 Location: Birch Bay WA Posts: 190	Re: Transmission locked in Reverse Keep the ideas coming, will work through them this weekend. Gerry Birch Bay Wa

09-20-2018, 10:38 PM	#14
GerryAllen Senior Member Join Date: May 2018 Location: Birch Bay WA Posts: 190	Re: Transmission locked in Reverse Thank you all, got it unlocked. Removed the tower, rocked the car back and forth while gently nudging on the aft gear and Walla it was free. What a relief, thanks for your suggestions. New to Model A's, this web site and fellow club members really help us newbies with our problems. Gerry