01-11-2014, 06:09 PM | #1 |
Member
Join Date: Mar 2011
Location: Upper East Tennessee
Posts: 66
|
PVC Valve
Is there a PVC valve that is best suited for a 239 flathead engine? Thanks and God Bless, Selmer
|
01-11-2014, 09:58 PM | #2 |
Senior Member
Join Date: May 2010
Location: Waddell, AZ
Posts: 2,540
|
Re: PVC Valve
not sure if best suited, but maybe the PCV valve from the Jeep 258 engine??....good luck....Mike
|
Sponsored Links (Register now to hide all advertisements) |
|
01-11-2014, 10:00 PM | #3 |
Senior Member
Join Date: May 2010
Location: SLC Utah
Posts: 798
|
Re: PVC Valve
10/4!
__________________
RIP Tyler... My Son, Helper & Best Friend. Feb '78 to Father's Day '10. www.97-express.com ~ [email protected] |
01-11-2014, 10:43 PM | #4 |
Senior Member
Join Date: Nov 2011
Location: NW Arkansas
Posts: 524
|
Re: PVC Valve
I used a Fram PCV306. Works great.
|
01-12-2014, 12:20 PM | #5 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: PVC Valve
Sponsored Links (Register now to hide all advertisements)
Make sure the vacuum hose with the PCV in it is below the throttle valve plate. Eliminate the road draft tube, using a fitting in it's place to connect the vacuum/PCV hose. Make sure that you have a vented cap on the oil fill tube... The 8BA and 8CM engines are very simple, compared to the early engines to utilize a PCV on...
__________________
Bill.... 36 5 win cpe |
|
|
Sponsored Links (Register now to hide all advertisements) |
|