37 Ford Truck Project.

[oldfart36]

Well I think it's time! I'm getting very close to my goals and am thinking of selling my 37 ford truck bobber project. There's a couple different ways I'm thinking of, w/motor and tranny, wo/motor and tranny, etc. I'm not going to advertise except thru the HAMB. If interested let me know. I have many parts that go with the truck please contact me for details.

Truck has been chopped 4", has new patch panels-Drivers door skin, rocker panels, rear cab lower panel, and cab corners,

Chassis is Model A boxed front end with Super Bell 4" drop axle, back half is hand built, approx. 12" Z, with good s-10 rearend. Rolls on 16 inch wires with new firestones.

Motor (in it at present) SBC 305 w/350 turbo trans., fresh bottom end with fresh 194 double hump heads, offey 2X4 intake with 2 holley 500's at present.

Many parts not listed, please contact me for details

More pics here: http://www.jalopyjournal.com/forum/a...?albumid=16080

With motor and trans $5,800. Without motor and trans $4,800

Thanks, Chris,620-820-9339

[oldfart36]

Additional info:

Hopefully this will help with some of the questions I've gotten. I've lowered the price a bit, this will be a firm price. I've recieved lots of trade offers, sorry I have a direction I'm going and trades don't figure in right now. (no trades please)

The truck includes,

The body (cab and bed), chassis with all it's component in pictures (refer to info above), mustang steering box w/idle arm and inner shaft column, later 30's ford banjo steering wheel, front brake drums and backing plates, 2 radiators-30's ford and newer mustang II, rear shocks, 40's ford brake pedal assembly, WWII-Korea era oxg. tank (planned on using it for a gas tank).

##This would be the 4,500 price.##
With engine and trans:

All of the above plus:
New wiring kit, 305 motor w/new 521 lift vodoo cam, double hump 194 heads, offey 2X4 intake with 2 holley 500 carbs and hilbrand air intake, new speedway block hugger headers.
350 turbo trans., w/stall converter, Lokar swan shifter ( it's the tallest one approx. 36")

##This would be the 5,500 price##

More pics here: http://www.jalopyjournal.com/forum/a...?albumid=16080
http://www.jalopyjournal.com/forum/a...?albumid=11450

Wow, don't know why these links aren't working!! They work in the first post. Go to top post, the same links work.

Clear Kansas Title.


Thanks, Chris. 620-820-9339

[oldfart36]

Sponsored Links (Register now to hide all advertisements)

The truck is SOLD. Thanks guys.