The Ford Barn

Drive Shaft Dave · 08-08-2015, 08:32 PM

I am getting ready to install the seat riser in my 30 coupe,what are the size, type and length of these rivet's?

Drive Shaft Dave · 08-10-2015, 09:22 PM

btt

RonC · 08-10-2015, 10:06 PM

Dave try these people
www.bigflatsrivet.com/index.html

Drive Shaft Dave · 08-10-2015, 11:43 PM

The problem I am having is , someone drilled 5/16 hole in the subframe and crosswise channels and had bolted the seat riser in place. Yesterday I looked at another coupe and the rivets looked like floor pan rivets. Maybe I'll have to weld up the hole's and redrill to 3/16. I didn't get a chance to look under the car. Are the original rivets 3/16? Thanks for the reply.

BILL WILLIAMSON · 08-11-2015, 12:59 PM

BOY, do I remember drilling out ALL 19 of them out, when I moved Minervas' seat back, by 4"!!! I BOLTED it back in.
It was a HOT evening, NO FAN, & the DANGED phone kept RINGING +&#%^$#@$
Bill W.

Drive Shaft Dave · 08-11-2015, 10:12 PM

Sponsored Links (Register now to hide all advertisements)

Hey Bill Thanks for the reply, your'e A good guy!

08-08-2015, 08:32 PM	#1
Drive Shaft Dave Senior Member Join Date: Dec 2011 Location: New hope Minnesota Posts: 742	1930 coupe seat riser I am getting ready to install the seat riser in my 30 coupe,what are the size, type and length of these rivet's?

08-10-2015, 09:22 PM	#2
Drive Shaft Dave Senior Member Join Date: Dec 2011 Location: New hope Minnesota Posts: 742	Re: 1930 coupe seat riser btt

08-10-2015, 10:06 PM	#3
RonC Senior Member Join Date: May 2010 Location: Rhode Island Posts: 1,868	Re: 1930 coupe seat riser Dave try these people www.bigflatsrivet.com/index.html

08-10-2015, 11:43 PM	#4
Drive Shaft Dave Senior Member Join Date: Dec 2011 Location: New hope Minnesota Posts: 742	Re: 1930 coupe seat riser The problem I am having is , someone drilled 5/16 hole in the subframe and crosswise channels and had bolted the seat riser in place. Yesterday I looked at another coupe and the rivets looked like floor pan rivets. Maybe I'll have to weld up the hole's and redrill to 3/16. I didn't get a chance to look under the car. Are the original rivets 3/16? Thanks for the reply.

08-11-2015, 12:59 PM	#5
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: 1930 coupe seat riser BOY, do I remember drilling out ALL 19 of them out, when I moved Minervas' seat back, by 4"!!! I BOLTED it back in. It was a HOT evening, NO FAN, & the DANGED phone kept RINGING +&#%^$#@$ Bill W. __________________ "THE ASSISTANT GURU OF STUFF"

08-11-2015, 10:12 PM	#6
Drive Shaft Dave Senior Member Join Date: Dec 2011 Location: New hope Minnesota Posts: 742	Re: 1930 coupe seat riser Sponsored Links (Register now to hide all advertisements) Hey Bill Thanks for the reply, your'e A good guy!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode