Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-19-2020, 08:30 PM   #1
CA Victoria
Senior Member
 
CA Victoria's Avatar
 
Join Date: Feb 2011
Posts: 2,111
Default Dipstick location 1935 Engine

How far above the pan does the dipstick sit on the 1935 engine?
The reproduction tube I had was even longer than the stock tube by 1/4”.
As pictured the stick is 1” above the pan.

Easy enough to check as I fill it.........just curious-
Attached Images
File Type: jpg 60A4687D-9995-47E4-8580-897879654360.jpg (44.9 KB, 67 views)
__________________
Tim
Downtown, Ca
CA Victoria is offline   Reply With Quote
Old 02-20-2020, 01:15 PM   #2
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 4,743
Default Re: Dipstick location 1935 Engine

The 35 Ford had an early and a later oil pan. Each pan has it's own dip stick tube and dip stick. I checked a 34 oil pan and the dip stick reached nearly to the bottom of the cup.
Terry,OH is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-20-2020, 11:33 PM   #3
CA Victoria
Senior Member
 
CA Victoria's Avatar
 
Join Date: Feb 2011
Posts: 2,111
Default Re: Dipstick location 1935 Engine

Thank you for the feed back. I remember my 8RT dipstick was closer to the bottom.
Update:
I just reviewed the info from the 35-36 Ford Book.

You are spot on, two tubes but mine is matched correctly with the bracket.
My dipstick is the correct length @ 16 3/4” & my tube is 8 21/64 (48-6754-B) it’s overall length is correct.
Still seems excessive but will verify when I fill it.
__________________
Tim
Downtown, Ca

Last edited by CA Victoria; 02-20-2020 at 11:45 PM.
CA Victoria is offline   Reply With Quote
Old 03-05-2020, 09:10 AM   #4
CA Victoria
Senior Member
 
CA Victoria's Avatar
 
Join Date: Feb 2011
Posts: 2,111
Default Re: Dipstick location 1935 Engine

Sponsored Links (Register now to hide all advertisements)
To close the loop.
5 quarts brought the oil level up to the full mark on the dip stick (1” off the bottom of the pan) It takes appx. 1.25 qts of oil before registering on the stick.
The safe driving area was about a 1.5 qt range.
__________________
Tim
Downtown, Ca
CA Victoria is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:39 PM.