|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-02-2019, 02:32 PM | #1 |
Senior Member
Join Date: Oct 2010
Location: Hancock, MA
Posts: 2,776
|
59 AB intake ID (stock)
I know the blocks these came off of based on Van Pelts site. What I have are a 41-42 (right/Blue) and a 46-48 (Left/orange). Are these intakes matching that? The blue has fittings on the left side that the orange/Dirt one does not. The Orange/dirt one has a groove cut between the carb ports.
Thanks
__________________
Short URL: http://smu.gs/14g7eDW |
02-02-2019, 03:53 PM | #2 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,541
|
Re: 59 AB intake ID (stock)
the older one may have a vacuum port for the early distributor.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-02-2019, 04:23 PM | #3 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,616
|
Re: 59 AB intake ID (stock)
The blue manifold has provision for two vacuum lines, the forward line goes to the front center mounted distributor, while the rear line supplies vacuum for the windshield wiper. The orange manifold is for later engines having front side mounted distributors, for which vacuum is supplied directly from the carburetor base.
__________________
Alan |
02-03-2019, 07:50 AM | #4 |
Senior Member
Join Date: Oct 2010
Location: Hancock, MA
Posts: 2,776
|
Re: 59 AB intake ID (stock)
Ahh. Like this right?
__________________
Short URL: http://smu.gs/14g7eDW |
02-03-2019, 01:06 PM | #5 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,541
|
Re: 59 AB intake ID (stock)
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|