Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-23-2015, 03:57 AM   #1
B-nut
Senior Member
 
Join Date: May 2010
Location: Vt
Posts: 231
Default 35 radiator removal with grille in place?

Have any of you successfully removed the 35 Ford radiator while leaving the grille in place? If the water pumps and generator were off it looks as though it might come out.Thanks
B-nut is offline   Reply With Quote
Old 07-23-2015, 06:09 AM   #2
oldbugger
Senior Member
 
oldbugger's Avatar
 
Join Date: May 2010
Location: Holland Mi
Posts: 627
Default Re: 35 radiator removal with grille in place?

Yes I have done it but its a pain, I still have to touch up the paint on the fender.
oldbugger is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-23-2015, 06:29 AM   #3
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,856
Default Re: 35 radiator removal with grille in place?

Yes, I have removed the radiator with grille in place on my '35 Fordor after removing generator, water pumps and distributor. The last step required "gently" pulling/prying up on top of grille enough to allow top of radiator to come back so it could be lifted out. I found this to be less work than completely removing the grille and then trying to put it back in and line every thing up again. Patience and care are your friends.
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein

Last edited by JM 35 Sedan; 07-23-2015 at 07:27 PM.
JM 35 Sedan is offline   Reply With Quote
Old 07-23-2015, 06:43 AM   #4
Talkwrench
Senior Member
 
Talkwrench's Avatar
 
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,687
Default Re: 35 radiator removal with grille in place?

Such a fun job!
__________________
"Came too close to dying to stop living now!"
Talkwrench is offline   Reply With Quote
Old 07-23-2015, 07:09 AM   #5
Kerk
Senior Member
 
Join Date: May 2010
Posts: 642
Default Re: 35 radiator removal with grille in place?

Sponsored Links (Register now to hide all advertisements)
I suggest you tape a piece of sheet metal to engine side to prevent damage. I carry a piece in case I have to remove the distributor. Can store under floor mat. jmo kx
Kerk is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:57 PM.