The Ford Barn

Norm M · 05-17-2018, 08:13 AM

It seems that a good portion of the track which holds the weatherstripping in the windshield of my Town Sedan has been rusted away. Is a new channel available or can one be made and spot welded in. Or can I just remove the old weatherstripping and glue the new one in place where the channel is missing? Anyone know of a decent used windshield for a 160 (but not as used as mine)?
Norm

burner31 · 05-18-2018, 12:59 AM

Sponsored Links (Register now to hide all advertisements)

If you're just going for a driver and not a high point car I'd say just glue it in place if not to much of the channel is gone.
Or you could get the new frame for about $350

05-17-2018, 08:13 AM	#1
Norm M Junior Member Join Date: Jan 2014 Posts: 28	Windshield Weatherstripping for 160B Town Sedan It seems that a good portion of the track which holds the weatherstripping in the windshield of my Town Sedan has been rusted away. Is a new channel available or can one be made and spot welded in. Or can I just remove the old weatherstripping and glue the new one in place where the channel is missing? Anyone know of a decent used windshield for a 160 (but not as used as mine)? Norm

05-18-2018, 12:59 AM	#2
burner31 Senior Member Join Date: Dec 2014 Location: Shawnee, Ok Posts: 3,471	Re: Windshield Weatherstripping for 160B Town Sedan Sponsored Links (Register now to hide all advertisements) If you're just going for a driver and not a high point car I'd say just glue it in place if not to much of the channel is gone. Or you could get the new frame for about $350 __________________ Keith Shawnee OK '31 SW 160-B

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode