The Ford Barn

thirt4 · 04-11-2014, 02:00 AM

Well, the re-assembly of this long project is getting closer.
The newest "stump" is, what holds the front license plate bracket on my 1934 3 window?
I cannot locate any extra holes in the bumper and am not about to drill any holes in the front fender.

I cannot even find any pictures of where it mounts.

Is there a special brace or bracket and if so, who might sell one? I tried MAC's and C and G with no success.

Thank you.

koates · 04-11-2014, 03:18 AM

Hi there, There are four front bumper irons or brackets which mount on the two front chassis extensions. The left hand outer iron has two small 1/4" holes already drilled in it to mount the license plate bracket onto with two bolts and nuts. That's presuming you have the correct bumper bar mounting irons. 33 & 34 IRONS have diamention differences as do the bumpers themselves so you need the correct ones. Regards, Kevin.

koates · 04-11-2014, 03:44 AM

Sponsored Links (Register now to hide all advertisements)

Just to clarify, Left hand bracket (looking at the front of car) which is actually the right hand side of the car. License plate front mounting brackets and bumper irons are available as reproductions. Regards, Kevin.

04-11-2014, 02:00 AM	#1
thirt4 Senior Member Join Date: May 2010 Location: Arizona, USA Posts: 288	Front license plate bracket Well, the re-assembly of this long project is getting closer. The newest "stump" is, what holds the front license plate bracket on my 1934 3 window? I cannot locate any extra holes in the bumper and am not about to drill any holes in the front fender. I cannot even find any pictures of where it mounts. Is there a special brace or bracket and if so, who might sell one? I tried MAC's and C and G with no success. Thank you.

04-11-2014, 03:18 AM	#2
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 2,079	Re: Front license plate bracket Hi there, There are four front bumper irons or brackets which mount on the two front chassis extensions. The left hand outer iron has two small 1/4" holes already drilled in it to mount the license plate bracket onto with two bolts and nuts. That's presuming you have the correct bumper bar mounting irons. 33 & 34 IRONS have diamention differences as do the bumpers themselves so you need the correct ones. Regards, Kevin.

04-11-2014, 03:44 AM	#3
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 2,079	Re: Front license plate bracket Sponsored Links (Register now to hide all advertisements) Just to clarify, Left hand bracket (looking at the front of car) which is actually the right hand side of the car. License plate front mounting brackets and bumper irons are available as reproductions. Regards, Kevin.