The Ford Barn

barnfind · 11-27-2011, 02:11 PM

Does anyone have dimensions on original running boards for a coupe?
Need width measurement from the frame to the bottom edge.
Bought a car and trying to fit the fenders.
It has repros from the 90s and I think they are too wide.
I measure about 13 and 3/4 or so on the front fender joint.
Rears are too wide as well.

thanks

TagMan · 11-27-2011, 03:45 PM

I can measure mine for you tomorrow (Monday), if somebody doesn't give you the answer before that.
-Bob

wamnram · 11-27-2011, 07:18 PM

Sponsored Links (Register now to hide all advertisements)

13 inches from frame front, 12-3/4 from frame rear, 9-3/4 inches from rear body mount.

11-27-2011, 02:11 PM	#1
barnfind Senior Member Join Date: Jan 2011 Posts: 426	1936 Coupe Running Board Width ??? Does anyone have dimensions on original running boards for a coupe? Need width measurement from the frame to the bottom edge. Bought a car and trying to fit the fenders. It has repros from the 90s and I think they are too wide. I measure about 13 and 3/4 or so on the front fender joint. Rears are too wide as well. thanks

11-27-2011, 03:45 PM	#2
TagMan Senior Member Join Date: Jul 2011 Location: Alvaton, Kentucky, USA Posts: 952	Re: 1936 Coupe Running Board Width ??? I can measure mine for you tomorrow (Monday), if somebody doesn't give you the answer before that. -Bob

11-27-2011, 07:18 PM	#3
wamnram Senior Member Join Date: May 2010 Location: San Tan Valley, Arizona Posts: 210	Re: 1936 Coupe Running Board Width ??? Sponsored Links (Register now to hide all advertisements) 13 inches from frame front, 12-3/4 from frame rear, 9-3/4 inches from rear body mount. __________________ Wayne Last edited by wamnram; 11-27-2011 at 08:37 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode