|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-18-2012, 01:37 AM | #1 |
Member
Join Date: May 2010
Posts: 77
|
ned some info on re 1953 Mercury HT
Hello: I have purchased a 1953 Mercury HT and would like to upgrade the the front brakes to disc and I understand there is a kit available to do this.
I have a friend with a brand new Jamco dropped spindle and disc brake setup for his 1950 ford and has decided to go with a mustange 2 setup for it instead. I can buy his complete front end setup from him for a very reasonable price. My question is will his 50 for disc upgrade fit the 53 merc front end? Can the 50 ford dropped spindles be mounted in place of the 53 merc front end or will the Jamco disc set up work with the stock 53 merc spindles?? Thanks in advance |
04-18-2012, 06:16 AM | #2 |
Senior Member
Join Date: Dec 2010
Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan
Posts: 638
|
Re: ned some info on re 1953 Mercury HT
What does Jamco say?
|
Sponsored Links (Register now to hide all advertisements) |
|
04-19-2012, 09:09 PM | #3 |
Member
Join Date: May 2010
Posts: 77
|
Re: ned some info on re 1953 Mercury HT
They haven't answered my email as of this posting.
|
04-20-2012, 03:09 AM | #4 |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: ned some info on re 1953 Mercury HT
Sponsored Links (Register now to hide all advertisements)
Last edited by JeffB2; 04-20-2012 at 03:18 AM. |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|