|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-18-2015, 05:00 PM | #1 |
Senior Member
Join Date: Apr 2012
Posts: 141
|
Convert to 12 volt or not?
We have a '30 Model A coupe that I've driven at night a time or two. The lights are pretty good with 6 volts, however I have been thinking about converting to 12 volt, adding a second tail light and turn signals. Seems that would make the car safer if I do get caught out at night. I'd sure welcome any thoughts on cost and suggestions on how to go about that. Thanks
|
11-18-2015, 05:09 PM | #2 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: Convert to 12 volt or not?
Turn signals and the second tail light will work fine on 6v.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-18-2015, 05:59 PM | #3 |
Senior Member
Join Date: May 2010
Location: Pine, AZ
Posts: 791
|
Re: Convert to 12 volt or not?
Have you gone to the higher wattage headlights? All the reflectors good, properly focused, good electrical connections both supply and grounds, new wiring? All of these areas bring the headlights and tail lights up to good levels. 6Volts will work good if all these areas are inspected and made like new. I can send you a list of all higher wattage bulbs for both 6V and 12V. BTW I switched back to 6V and am happy with the results as is just like Henry built it.
|
11-18-2015, 06:01 PM | #4 |
Senior Member
Join Date: May 2010
Location: Pine, AZ
Posts: 791
|
Re: Convert to 12 volt or not?
My email is [email protected] Forgot to include with previous message. Get the generator working with Tom Wesenberg's electronic voltage regulator and will not have to run an alternator or 12V
|
11-18-2015, 06:08 PM | #5 |
Member
Join Date: Jun 2012
Location: miles city, mt.
Posts: 40
|
Re: Convert to 12 volt or not?
I agree Tom's electronic voltage regulator is trouble free, easy to install and very reasonably priced, a great improvement.
|
11-18-2015, 06:29 PM | #6 |
Senior Member
Join Date: Aug 2014
Location: Rhinebeck, NY
Posts: 758
|
Re: Convert to 12 volt or not?
Sponsored Links (Register now to hide all advertisements)
|
11-18-2015, 10:05 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Convert to 12 volt or not?
Quote:
Good reflectors, proper aim and focus, and 6 volts works fine for me. My 28 has all original parts for the lights. In fact it was just a could years ago that the original Ford script taillight bulb burned out. |
|
11-18-2015, 10:30 PM | #8 |
Senior Member
Join Date: Aug 2014
Location: Rhinebeck, NY
Posts: 758
|
Re: Convert to 12 volt or not?
[QUOTE=Tom Wesenberg;1192190]I might have an NOS generator for your car.
Thanks, Tom, but I sold the Packard to buy my Special Coupe. The Packard was too new. |
11-19-2015, 08:30 AM | #9 | |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,132
|
Re: Convert to 12 volt or not?
Quote:
i have been using direct fit 35 watt bulbs for the last ---well close to 15 years, they use less than seal beams or 50cp regular bulbs ---i drive about 50% with lights on, have long battery life, and generator life, never charg battery except by driving ---I also have dual tailights, and fast enough cranking that I have been told I must have 12 volts My friend just bought a 36 Packard that has had halogen bulbs with the original generator for the last 10 years---direct fit 35 watt bulbs |
|
11-19-2015, 08:34 AM | #10 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,425
|
Re: Convert to 12 volt or not?
12V halogen headlights work very well with an alternator.
__________________
Bob Bidonde |
11-19-2015, 10:26 AM | #11 |
Senior Member
Join Date: Oct 2014
Location: Kentucky
Posts: 502
|
Re: Convert to 12 volt or not?
I am new to Model A's this being my first year of ownership. I have learned so much from all the great folks on the Barn.
Rainmaker Ron did the electrical work on my CCPU. Since I like to tour I followed his lead and he did the 12 Volt Conversion: Halogen bulbs, Alternator, 2nd tail light and turn signals. I have now toured 2,000 miles and for me the conversion works for me for a touring car. The majority of the cars on the tours I have been on have been converted to Halogen with turn signals and 2 tail lights. Our tours often require night driving and inclement weather. Following cars and looking at cars behind me it is easy to tell who has the BRIGHT LIGHTS! I do not have the LED tail lights. They seem to be very popular and are very BRIGHT. I kept the 6 volt starter but am installing a heavy duty Bendix this winter. |
11-19-2015, 11:14 AM | #12 |
Senior Member
Join Date: May 2010
Location: Eastern CT
Posts: 2,732
|
Re: Convert to 12 volt or not?
My roadster came with halogen lights in reflectors made for the halogen bulbs. They were very bright, but not focused at all. They were like big flood lights that lit up the whole countryside and blinded oncoming cars, but lit the road very poorly. I installed refinished original reflectors and 50/50 bulbs, and could see very much better, and the light was on the road, not in the eyes of oncoming cars, or lighting up the whole area.
|
11-19-2015, 12:46 PM | #13 |
Senior Member
|
Re: Convert to 12 volt or not?
One would be in wonder how well the 6 volt set up is for headlights with properly shaped and finished reflectors along with properly focused bulbs just as 2manycars has stated.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
11-19-2015, 12:52 PM | #14 |
Senior Member
Join Date: May 2010
Location: Eastern CT
Posts: 2,732
|
Re: Convert to 12 volt or not?
I find that the lighting is not as good as a sealed beam light in a 50 ford, for instance, but it is really very good, and plenty good for the speed that the model A usually is driven on back roads. Also, my car is early, so has the early fluted lenses, and I would guess the twolite headlamps with the prizims in the lenses would be even better.
|
11-19-2015, 01:37 PM | #15 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,132
|
Re: Convert to 12 volt or not?
I have compared my direct fit halogens to 6V seal beams, the halogens with original lenses and reflectors light up signs about 2 phone poles further, and are brighter at idle when the generator is not charging--- if the silver on my reflectors was better I would think the lights are the same as modern car
|
11-19-2015, 03:04 PM | #16 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Convert to 12 volt or not?
The higher the voltage, the more chance of electrocuting yourself.
|
11-19-2015, 10:11 PM | #17 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,469
|
Re: Convert to 12 volt or not?
I run a 6V, have two tail lights converted over to LED's, LED turn signals, sealed beam headlights, have no problem with them, I run my lights a lot when I drive during the day just so the dummy's out there can see me better when they look up from their phones.
I never worry about driving at night, it's just like the day...just darker.
__________________
Keith Shawnee OK '31 SW 160-B |
11-19-2015, 10:47 PM | #18 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,107
|
Re: Convert to 12 volt or not?
Driving at "night" in the summer is just like driving in the daytime. And headlights are on just so that others can see me. (Nevermind it's the law when you leave town anyway).
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
11-20-2015, 08:45 PM | #19 |
Junior Member
Join Date: Oct 2014
Location: Ontario
Posts: 19
|
Re: Convert to 12 volt or not?
I'm running LED headlights, a direct bulb replacement for 6v positive ground. From Classic Dynamo and Regulator Conversions. I was over at the Classic Show at the NEC in Birmingham last week and picked them up. Model BA15d 40/36w double dipper.
I'm very impressed with them, they focussed up well, and seem to throw a good very white beam. And the best part is they only use one amp vs. 8 for the old bulbs (the ammeter barely moves). Just my experience, I'm not trying to promote them (they're not cheap). But certainly less work than changing to 12volts. I'm guessing more of these will be available soon. |
11-20-2015, 10:32 PM | #20 |
Senior Member
Join Date: May 2010
Location: Fountain Valley, Calif.
Posts: 937
|
Re: Convert to 12 volt or not?
I have a 6v alternator, quartz halogen bulbs, turn signals, dual LED taillights. I no reason to go to 12v unless you have special 12v needs. My bulbs are well focused and light up the road very well; high beams are too bright except on the open road.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|