|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
11-11-2012, 01:00 PM | #1 |
Member
Join Date: Sep 2011
Location: Madras Oregon
Posts: 89
|
1913-22 trunk lid HANDLES/LATCHES needed
City:
Madras
State:
Oregon
I am looking for a roadster 1913-22 turtle deck lid for my '15 Speedster project. This is the square lid with 2 handles, early ones have cast handles, later have stamped steel. Corners of the lid are rounded. Doesn't matter to me which year as they will all work. For the right price I would buy the turtle deck and lid if I can't find just a lid by itself.
These differ from the 22-25 in that those are rectangular and have square corners and no handles, only a keyhole. Thank you. Last edited by dwollam; 11-25-2012 at 09:30 PM. |
11-25-2012, 09:29 PM | #2 |
Member
Join Date: Sep 2011
Location: Madras Oregon
Posts: 89
|
Re: 1913-22 trunk lid needed
I found a deck lid, now I need the 2 handle/latches for it.
Thanks, Dave |
Sponsored Links (Register now to hide all advertisements) |
|
11-29-2012, 10:16 PM | #3 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: 1913-22 trunk lid HANDLES/LATCHES needed
1915 up used a key so would only have a single hole in the bottom center.
http://www.modeltford.com/model-t-parts/body/trunk/ |
12-01-2012, 07:31 PM | #4 |
Member
Join Date: Sep 2011
Location: Madras Oregon
Posts: 89
|
Re: 1913-22 trunk lid HANDLES/LATCHES needed
I believe the roadster used the 2 handles through early 22 but the coupe had a key hole from around 15 and later. Late 22 to 25 the roadster went to the rectangular deck lid with the key. Anyway, I have the deck lid that needs 2 handles.
|
12-02-2012, 01:09 AM | #5 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: 1913-22 trunk lid HANDLES/LATCHES needed
I think you are right.
MarkG |
12-13-2012, 08:28 PM | #6 |
Member
Join Date: Sep 2011
Location: Madras Oregon
Posts: 89
|
Re: 1913-22 trunk lid HANDLES/LATCHES needed
Sponsored Links (Register now to hide all advertisements)
Still need latches. |
12-30-2012, 12:47 AM | #7 |
Member
Join Date: Sep 2011
Location: Madras Oregon
Posts: 89
|
Re: 1913-22 trunk lid HANDLES/LATCHES needed
Too cold here to work on it but I am still Looking!
Dave |
|
|
Sponsored Links (Register now to hide all advertisements) |
|