|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-17-2019, 08:10 PM | #1 |
Senior Member
Join Date: May 2010
Location: Virginia
Posts: 210
|
Torque value fors 292 and pcv reccomendation
Anyone got a torque chart stating what the bolts that draw down the oil galley cover should be and also the intake manifold bolts torue values are . Also-does anyone know of what pcv valve might fit the opening where the draft tube attaches? Thanks in advance
|
10-17-2019, 08:14 PM | #2 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,981
|
Re: Torque value fors 292 and pcv reccomendation
Both specs should be in the shop manual.
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
Sponsored Links (Register now to hide all advertisements) |
|
10-17-2019, 11:35 PM | #3 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,471
|
Re: Torque value fors 292 and pcv reccomendation
Quote:
As for the valley pan, the replacement grommets are too thick for some applications and may cause the fastener to hit the bottom of the intake. What car and engine do have in regard to PCV? EDIT - Here is a torque value chart - http://yblockguy.com/techtips/yblocktorquetable.html If not enough let me know.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 10-17-2019 at 11:47 PM. |
|
10-18-2019, 08:43 AM | #4 |
Senior Member
Join Date: May 2010
Location: Virginia
Posts: 210
|
Re: Torque value fors 292 and pcv reccomendation
Kultutz-thanks for the torque spec on the intake manifold bolts as I don't have a manual.
do you have a publication for specs on the 2 bolts that hold the oil galley cover pan. I am thinking about replacing the oil draft tube with a PCV valve on 56 Ford Fairlane with 292. thanks again for any suggestions |
10-18-2019, 11:49 AM | #5 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,471
|
Re: Torque value fors 292 and pcv reccomendation
Quote:
Just make sure the grommet used isn't too think.
__________________
***** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
10-18-2019, 12:02 PM | #6 |
Senior Member
Join Date: Mar 2018
Location: Arkansas
Posts: 525
|
Re: Torque value fors 292 and pcv reccomendation
|
10-19-2019, 01:09 PM | #7 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: Torque value fors 292 and pcv reccomendation
A PCV system from a '63-64 292 F-100/350 is a perfect fit for all early Y-Blocks.
__________________
Bill.... 36 5 win cpe |
|
|
Sponsored Links (Register now to hide all advertisements) |
|