|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-14-2021, 12:27 PM | #1 |
Member
Join Date: Sep 2020
Location: Visalia, CA
Posts: 93
|
42-48 Convertible rear wood panels
Can someone help with drawings or patterns or dimensions or images of the rear seat wood panels? My car came with nothing aside from the lower front of the back seat horizontal piece. Photos of them would be a great help if nothing else.
Trying to keep it as close to original if possible. Thank you everyone in advance. Feel free to e-mail me at [email protected] Tracy |
12-14-2021, 08:21 PM | #2 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: 42-48 Convertible rear wood panels
Wood Panels? Not sure what you mean. I have a 48 conv and the only wood is the one under the front of the rear seat and the pieces for the conv. top tray at the back of the upper part of the seat.
Mine was never factory so maybe I'm missing something. For that conv top tray, I made what I though was right so mine is not factory dimensions.
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
Sponsored Links (Register now to hide all advertisements) |
|
12-15-2021, 11:00 AM | #3 |
Member
Join Date: Sep 2020
Location: Visalia, CA
Posts: 93
|
Re: 42-48 Convertible rear wood panels
Those are the pieces I don't have. Can you give me any photos of what you did?
At least the measurement of the bottom of the top tray from back to front? |
12-15-2021, 11:00 AM | #4 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,930
|
Re: 42-48 Convertible rear wood panels
Maybe his convertible is a Sportsman!
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
12-15-2021, 12:04 PM | #5 |
Member
Join Date: Sep 2020
Location: Visalia, CA
Posts: 93
|
Re: 42-48 Convertible rear wood panels
Still looking for some photos of the convertible top tray? wood pieces behind the back seat on the inside of the car. Measurements or ?? Thank you everyone. Car is a 1946 Ford Convertible if anyone is confused. Thank you in advance,
|
12-15-2021, 05:03 PM | #6 |
Member
Join Date: May 2012
Location: Placerville, CA 95667
Posts: 96
|
Re: 42-48 Convertible rear wood panels
Sponsored Links (Register now to hide all advertisements)
Attached are some photos of the convertible wood pieces. The photo of the top tray has dimensions, hope you can read them. Also, there is a couple photos of the wood divider that goes at the bottom front of the rear seat. Good luck. |
12-15-2021, 06:35 PM | #7 |
Member
Join Date: Sep 2020
Location: Visalia, CA
Posts: 93
|
Re: 42-48 Convertible rear wood panels
Thank you rg130, that is exactly what I was looking/hoping to find.
I saved the pics and I can read everything perfectly, thank you again! Tracy |
|
|
Sponsored Links (Register now to hide all advertisements) |
|