The Ford Barn

JohnB15632 · 08-08-2019, 09:49 AM

Can anyone out there in Model A land be able to tell me the dimensions marked in RED ?
There is no vendor supplying the locking door handle manufactured per the attached.

Thanks,

Oldbluoval · 08-08-2019, 10:03 AM

You'll likely get your answer. If not, I can get those tomorrow afternoon when I return.
I'll stay tuned to see.

31Cabriolet68-C · 08-08-2019, 12:21 PM

Overall I see 1 3/32"
For the first measurment inward I see 9/16"
For the next inward area I see 7/32"
For the third dimension I see 5/16"

However, there are irregular chamfers, crimps, and wear spots on the shaft, so these #s have some 'slop'...

BTW, Do the repops have a spring mounted inside the handle that allows the shaft to 'flex'?
Thanks, John

Gary WA · 08-08-2019, 09:24 PM

Sponsored Links (Register now to hide all advertisements)

any of these work?

08-08-2019, 10:03 AM	#2
Oldbluoval Senior Member Join Date: Jun 2015 Location: Signal Mtn, TN (SE TN) Posts: 2,370	Re: 31 Locking Door Handle Shaft Dimensions You'll likely get your answer. If not, I can get those tomorrow afternoon when I return. I'll stay tuned to see.

08-08-2019, 12:21 PM	#3
31Cabriolet68-C Senior Member Join Date: Jan 2018 Location: Greenwich, CT Posts: 140	Re: 31 Locking Door Handle Shaft Dimensions Overall I see 1 3/32" For the first measurment inward I see 9/16" For the next inward area I see 7/32" For the third dimension I see 5/16" However, there are irregular chamfers, crimps, and wear spots on the shaft, so these #s have some 'slop'... BTW, Do the repops have a spring mounted inside the handle that allows the shaft to 'flex'? Thanks, John