The Ford Barn

gaylordford2 · 06-10-2019, 09:33 AM

I'm looking for a pattern to remake my 32 floor boards any help would be appreciated.

rotorwrench · 06-11-2019, 09:03 AM

You might try the early V8 section.

Charlie Stephens · 06-11-2019, 11:52 AM

Sponsored Links (Register now to hide all advertisements)

The only pattern I have seen was in a 1973 (approx) issue of the Early V8 Times magazine. To do it right there is mill work involved (unlike the Model A which was just cuts). I decided to buy a set. In addition to rotor wrench's suggestion you might also try the Early Ford V8 Club site (https://www.earlyfordv8.org/index.cfm). Also you might try the archives. I would also suggest putting your general location in your profile. You can never tell when it will pay off.

Charlie Stephens

06-10-2019, 09:33 AM	#1
gaylordford2 Junior Member Join Date: Jun 2019 Posts: 1	1932 floor pattern I'm looking for a pattern to remake my 32 floor boards any help would be appreciated.

06-11-2019, 09:03 AM	#2
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,419	Re: 1932 floor pattern You might try the early V8 section.

06-11-2019, 11:52 AM	#3
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,030	Re: 1932 floor pattern Sponsored Links (Register now to hide all advertisements) The only pattern I have seen was in a 1973 (approx) issue of the Early V8 Times magazine. To do it right there is mill work involved (unlike the Model A which was just cuts). I decided to buy a set. In addition to rotor wrench's suggestion you might also try the Early Ford V8 Club site (https://www.earlyfordv8.org/index.cfm). Also you might try the archives. I would also suggest putting your general location in your profile. You can never tell when it will pay off. Charlie Stephens

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode