|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-15-2011, 09:14 PM | #1 |
Junior Member
Join Date: Jul 2010
Posts: 19
|
1939 truck door latch and handle
can anybody tell me how the latch and outside door handle come apart on a 1939 ford truck? i also dont know how to get the door lock out either. thanks merle
|
01-16-2011, 11:50 AM | #2 |
Junior Member
Join Date: May 2010
Location: Billings, MT
Posts: 18
|
Re: 1939 truck door latch and handle
the 2 screws on the outside is all that hold the handle on, sometimes the square shaft gets twisted from too much pressure on the handle making it hard to come out but it will come. there is a small set screw holding the lock in, you can acess that from a hole in the door edge.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-16-2011, 12:13 PM | #3 |
Senior Member
Join Date: May 2010
Location: Suffolk, VA & Key West, FL
Posts: 119
|
Re: 1939 truck door latch and handle
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|