|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-18-2021, 10:58 AM | #1 |
Junior Member
Join Date: Jan 2016
Posts: 22
|
Replacing screens in '33-'35 horns
How do you remove and replace the "bug screens" in the '33-'35 horns without damaging the screens or the horns?
|
10-18-2021, 02:03 PM | #2 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,816
|
Re: Replacing screens in '33-'35 horns
To remove, you'll need to remove the projector, then reaching down from the top, simply push the centre of the screen outwards. To replace, you need to sort of preform the screen into a bulging convex shape until it's small enough to insert from the front, insert it and 'flatten' it out with your fingers until a snug fit is achieved
__________________
Unfortunately, two half wits don't make a whole wit! |
Sponsored Links (Register now to hide all advertisements) |
|
10-21-2021, 01:35 PM | #3 |
Junior Member
Join Date: Jan 2016
Posts: 22
|
Re: Replacing screens in '33-'35 horns
Thanks, Brian. That's helpful and makes sense.
|
10-22-2021, 12:35 AM | #4 |
Senior Member
Join Date: May 2010
Location: New Zealand
Posts: 297
|
Re: Replacing screens in '33-'35 horns
Sponsored Links (Register now to hide all advertisements)
When reinserting into new chrome be careful not to scratch the chrome. |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|