|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-12-2017, 07:29 PM | #1 |
Member
Join Date: Feb 2011
Location: Kingwood, Texas
Posts: 80
|
Front Bearing Adjustment
My late 31 Victoria has the Rocky Mountain style front hubs. After replacing the bearings and races and spinning the hub to "preload" the bearings, I still have some in-and-out movement on the hub. It is about 1mm of movement. Is that close enough or should there be no movement at all?
If I tighten things down to try to eliminate the movement, then everything binds and the hub barely moves. Your thoughts are greatly appreciated. Thanks from Houston. Mike Hanson |
|
|
Sponsored Links (Register now to hide all advertisements) |
|