|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-10-2019, 06:34 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: tolland CT
Posts: 773
|
Re: Two barrel carb spacer
HOLY COW....I ACTUALLY WAS ABLE TO POST A PICTURE.
this is the picture I took of my 55 Ford carb spacer. can you see the area that looks like it would take a PCV hose ? It appears to have some type of plug in it. All comments are appreciated... |
Sponsored Links (Register now to hide all advertisements) |
|
11-10-2019, 07:11 PM | #3 |
Senior Member
Join Date: May 2010
Location: Star, MS
Posts: 4,022
|
Re: Two barrel carb spacer
That is the bore for the butterfly shaft. There is no spacer on the carb/manifold.
|
11-10-2019, 08:47 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: tolland CT
Posts: 773
|
Re: Two barrel carb spacer
So then, thus is not a spacer but is a part of the carb, correct ?
Thanks for this important info... Guess I will be looking for a spacer after all... |
11-11-2019, 09:25 AM | #5 |
Senior Member
Join Date: May 2010
Location: Star, MS
Posts: 4,022
|
Re: Two barrel carb spacer
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|