The Ford Barn

AlfinVA · 03-21-2018, 02:51 PM

Guys, A very good friend drove over his Ford toe in-toe out gage with a modern completely crushing it. He's really devastated because it came from his dad. He's helped me a lot. I'd like to buy him a replacement. Does anyone have one to sell or knows where one might be for sale. Lacking that does anyone have a picture I can give to buddies who hit the flea markets?
Thanks AlfinVA

1930artdeco · 03-21-2018, 03:19 PM

Do you know who made it originally? There is one company that still makes them 80 yrs later. Sorry I don't remember the name, but if you do a search it will pop up. I think they are around $100-150?

Mike

Keith True · 03-21-2018, 03:46 PM

They are still made by the Duby company in Framingham Mass.At least they were a couple of years ago.I always heard them called a Duby bar.There are pictures of them online.

George · 03-21-2018, 03:55 PM

I purchased one from Summit Racing that does it for me. Longacre toe in gage.

Bob C · 03-21-2018, 05:02 PM

Here's some. https://www.ebay.com/sch/i.html?_nkw..._dmd=1&_ipg=50

Bob

Gary WA · 03-22-2018, 12:33 PM

Sponsored Links (Register now to hide all advertisements)

NAPA parts has them!

BillCNC · 03-22-2018, 01:12 PM

Quote:

Originally Posted by Gary WA

NAPA parts has them!

Hi Gary,

Do you have a part number or link. The only thing I could find was computerized systems.

Regards
Bill

03-21-2018, 02:51 PM	#1
AlfinVA Member Join Date: Jun 2014 Posts: 37	Model A Alignment (Toe in-Toe Out) Gage Guys, A very good friend drove over his Ford toe in-toe out gage with a modern completely crushing it. He's really devastated because it came from his dad. He's helped me a lot. I'd like to buy him a replacement. Does anyone have one to sell or knows where one might be for sale. Lacking that does anyone have a picture I can give to buddies who hit the flea markets? Thanks AlfinVA

03-21-2018, 03:19 PM	#2
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,552	Re: Model A Alignment (Toe in-Toe Out) Gage Do you know who made it originally? There is one company that still makes them 80 yrs later. Sorry I don't remember the name, but if you do a search it will pop up. I think they are around $100-150? Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan

03-21-2018, 03:46 PM	#3
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 2,989	Re: Model A Alignment (Toe in-Toe Out) Gage They are still made by the Duby company in Framingham Mass.At least they were a couple of years ago.I always heard them called a Duby bar.There are pictures of them online.

03-21-2018, 03:55 PM	#4
George Senior Member Join Date: May 2010 Location: Churchville, va. Posts: 140	Re: Model A Alignment (Toe in-Toe Out) Gage I purchased one from Summit Racing that does it for me. Longacre toe in gage.

03-21-2018, 05:02 PM	#5
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,753	Re: Model A Alignment (Toe in-Toe Out) Gage Here's some. https://www.ebay.com/sch/i.html?_nkw..._dmd=1&_ipg=50 Bob

03-22-2018, 12:33 PM	#6
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,104	Re: Model A Alignment (Toe in-Toe Out) Gage Sponsored Links (Register now to hide all advertisements) NAPA parts has them! __________________ www.whidbeymodelaclub.com