The Ford Barn

louieglen · 12-23-2017, 04:59 PM

Where can I buy a marvel shebler Carb. kit? Thanks

JOHN CT · 12-23-2017, 05:12 PM

http://rennerscorner.com/index.html?m

Bob-A · 12-23-2017, 06:27 PM

"Renner's Corner" are top notch people to deal with!

An asset to the "A"
community for sure!

Have "A" Merry Christmas,

Bob-A

31a · 12-24-2017, 12:10 AM

I have some marvel shebler carbs that I will sell if interested pm if interested bob

eagle · 12-24-2017, 09:31 AM

I've talked to several people who swear by the M/S carbs. I have one I completely re-built but my Zenith runs so good I've never tried the M/S.

duke36 · 12-24-2017, 11:50 AM

Sponsored Links (Register now to hide all advertisements)

Ditto to posts 2 and 3. Check with TAMS A parts for the lesser cost bowl gaskets , and other BARN threads and ebay for the float needle with Viton tip. The available grose jet style may not always seal well allowing gas to run out the intake horn.

12-23-2017, 04:59 PM	#1
louieglen Senior Member Join Date: May 2010 Posts: 218	marvel shebler Where can I buy a marvel shebler Carb. kit? Thanks

12-23-2017, 05:12 PM	#2
JOHN CT Senior Member Join Date: May 2010 Location: In my garage Posts: 465	Re: marvel shebler http://rennerscorner.com/index.html?m __________________ 31 Tudor 66 Bonneville 57 Chevy pickup 27 T roadster pick up

12-23-2017, 06:27 PM	#3
Bob-A Senior Member Join Date: May 2010 Location: Central FL, USA Posts: 1,137	Re: marvel shebler "Renner's Corner" are top notch people to deal with! An asset to the "A" community for sure! Have "A" Merry Christmas, Bob-A

12-24-2017, 12:10 AM	#4
31a Senior Member Join Date: Jun 2010 Location: College Station, Tx Posts: 326	Re: marvel shebler I have some marvel shebler carbs that I will sell if interested pm if interested bob

12-24-2017, 09:31 AM	#5
eagle Senior Member Join Date: Aug 2011 Location: Eagle Bend, MN Posts: 2,025	Re: marvel shebler I've talked to several people who swear by the M/S carbs. I have one I completely re-built but my Zenith runs so good I've never tried the M/S. __________________ "There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."

12-24-2017, 11:50 AM	#6
duke36 Senior Member Join Date: Jun 2015 Posts: 1,414	Re: marvel shebler Sponsored Links (Register now to hide all advertisements) Ditto to posts 2 and 3. Check with TAMS A parts for the lesser cost bowl gaskets , and other BARN threads and ebay for the float needle with Viton tip. The available grose jet style may not always seal well allowing gas to run out the intake horn.