Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-19-2019, 04:38 AM   #1
flathead48
Senior Member
 
Join Date: May 2010
Location: Saratoga Springs, NY
Posts: 681
Default 94 Carb

I purchased a rebuild kit from Daytona parts for the carb on my 48 passenger car. In the kit was a spark control valve, looks like a power valve. What carb would use this and what is the purpose. Thanks,

Rick
flathead48 is offline   Reply With Quote
Old 09-19-2019, 07:17 AM   #2
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 4,931
Default Re: 94 Carb

The later Holley 2100's and 2110's (used in '55-'56 Ford's, for one). If you have a "59" series 94 on your car, you don't need the spark valve.
tubman is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-19-2019, 10:13 AM   #3
flathead48
Senior Member
 
Join Date: May 2010
Location: Saratoga Springs, NY
Posts: 681
Default Re: 94 Carb

Tubman, thanks for the info.
flathead48 is offline   Reply With Quote
Old 09-19-2019, 10:56 AM   #4
scicala
Senior Member
 
scicala's Avatar
 
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 2,557
Default Re: 94 Carb

Yes, the new kits now mainly cover all years of the 94 type carb. They used the spark valve for the Loadomatic distributors starting in '54 with the introduction of the Y-Block V8 and through 1956 272's,


Sal
scicala is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:05 PM.