Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-12-2010, 09:25 PM   #1
Steve Plucker
Senior Member
 
Steve Plucker's Avatar
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 5,450
Default The Very Early OD-C1A Windshield Wiper...

When this wiper is attached to the windshield of the closed car, and if you were sitting in the car looking at it from the inside, on what side of the wiper is the electrical connection? On the left side or the Right side of the wiper?

This wiper was used from start of production through February 1928.

Thanks.

Pluck
__________________
www.plucks329s.org

Walla Walla (WA) Sweet A's since 1993

MARC/MAFCA member since 1978

Ford Model AA Truck Club since 1998

(LIONEL/MTH Toy Train Collector, Orange Crush Soda Collector, Steel Beer Can Collector, Old Gas Pump Collector)
Steve Plucker is offline   Reply With Quote
Old 05-12-2010, 11:30 PM   #2
Marco Tahtaras
Senior Member
 
Marco Tahtaras's Avatar
 
Join Date: May 2010
Posts: 3,099
Default Re: The Very Early OD-C1A Windshield Wiper...

If the terminal post was in a different location it would require a new hole be drilled in the windshield frame. There is no such instruction in the service letter detailing the wiper swap.
__________________
http://www.abarnyard.com/
Marco Tahtaras is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-13-2010, 06:25 AM   #3
dr.j
Senior Member
 
dr.j's Avatar
 
Join Date: May 2010
Location: Portland, ON, Canada
Posts: 305
Default Re: The Very Early OD-C1A Windshield Wiper...

Pluck,

perfect time to ask this question; I am looking for a wiper for my early 28 Tudor and have the hole measurements. I'll send the pic and diagram for I am not sure of additional holes have been added or not. The original owner installed a vacuum wiper which I have removed and I have forwarded the information to modelawipers.
__________________
Dave A Jamieson
Portland, ON
Canada
1928 Tudor
dr.j is offline   Reply With Quote
Old 05-13-2010, 07:13 AM   #4
Steve Plucker
Senior Member
 
Steve Plucker's Avatar
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 5,450
Default Re: The Very Early OD-C1A Windshield Wiper...

Quote:
Originally Posted by Marco Tahtaras View Post
If the terminal post was in a different location it would require a new hole be drilled in the windshield frame. There is no such instruction in the service letter detailing the wiper swap.

That is true.

Pluck
__________________
www.plucks329s.org

Walla Walla (WA) Sweet A's since 1993

MARC/MAFCA member since 1978

Ford Model AA Truck Club since 1998

(LIONEL/MTH Toy Train Collector, Orange Crush Soda Collector, Steel Beer Can Collector, Old Gas Pump Collector)
Steve Plucker is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:19 PM.