Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-22-2013, 09:12 AM   #1
Don
Senior Member
 
Don's Avatar
 
Join Date: May 2010
Location: Ashland KY
Posts: 1,022
Default Dyna beads

Do the dyna beads work as good as advertised? Using 600-16 tires on a 35 roadster.can't really get the vibration out around 55 mph, thought I might try the beads.
__________________
DON P
Don is offline   Reply With Quote
Old 09-22-2013, 11:23 AM   #2
trainguy
Senior Member
 
trainguy's Avatar
 
Join Date: May 2010
Location: Lehighton Pa
Posts: 1,085
Default Re: Dyna beads

I used dynamic beads in a mod A .PITA if you get a flat need special valve cores.As far as I am concerned not worth the trouble. Phil

Last edited by trainguy; 09-22-2013 at 01:12 PM.
trainguy is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-22-2013, 11:31 AM   #3
Cecil/WV
Senior Member
 
Cecil/WV's Avatar
 
Join Date: May 2010
Location: Gerrardstown, WV
Posts: 2,164
Default Re: Dyna beads

They work great in commercial tires-12x22.5.
Cecil/WV is offline   Reply With Quote
Old 09-22-2013, 12:17 PM   #4
Dave C
Member
 
Join Date: Jul 2010
Location: Wheatfield,IN
Posts: 46
Default Re: Dyna beads

I use dyna beads in my 67 Mustang with after market wheels that could not get balanced. Made a huge difference. Did not need special valve stems. Also use them in my car trailer tires. I am very happy with them. Dave c
Dave C is offline   Reply With Quote
Old 09-22-2013, 08:04 PM   #5
Mike B
Senior Member
 
Join Date: May 2010
Location: Oakdale,Ca
Posts: 1,323
Default Re: Dyna beads

Quote:
Originally Posted by Cecil/WV View Post
They work great in commercial tires-12x22.5.
I'll 2nd that...but add I run 10.00-22.5's

I also picked up a bag from a shop that I buy my recaps from...was surprised to find out it was a bag of powder they put in and it forms "beads/balls"...being the tightwad I am, I bought my own tires for my MotorHome and mounted them myself, then added the recommended amount for my tire size...after about 10 minutes of driving, all shakes ceased.
Mike B is offline   Reply With Quote
Old 09-23-2013, 06:05 AM   #6
Model A Bill
Member
 
Join Date: Nov 2011
Location: Wilmington New York
Posts: 94
Default Re: Dyna beads

I see this powder/balls in the firetrucks that I work on at my regular job.Its important to check for leakage at the valve stem after checking the air pressure as the material will move towards the vale stem when air is released,causing slight leakage.The tire shops around my area reccomend adding a slight bit of air to clean the valve stem before checking.As far as the product working it does in big tires
Model A Bill is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:39 PM.