Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-22-2016, 06:02 PM   #1
Nathan_1929
Member
 
Nathan_1929's Avatar
 
Join Date: Mar 2015
Location: Saint Louis, Los Angeles
Posts: 78
Default Zenith 2 gas adjsut needle seat

I just finished up rebuilding my Zenith 2.. almost. Everything was straight-forward and smooth, but I had what looked like one jet left over.

Looking online and they show a seat for the gas adjust needle. So, I peeked down in that hole and it looks like my needle seat is integral to the casting (either that, or the old one's really hidden down in there with a bunch of gunk). I scraped around it with a small flat-head and it shows no sign of a screwdriver groove, nor any shiny hints at it being a brass seat. I also don't see any threads that would indicate my "extra jet" threads down in there.

It just looks like an appropriately sized jet at the bottom of the casting hole.

Am I missing something here, or do the Zenith 2's have a built-in seat?

Thanks in advance.
__________________
Nathan - 1929 Closed Cab Pickup, 1929 Tudor, 1930 Coupe - Vintage BMW Motorcycle Collector/Mechanic
Nathan_1929 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:42 PM.