Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Rubber in the original mounts

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-05-2014, 05:31 PM   #1
Dave N.
Junior Member
 
Join Date: May 2010
Location: Indianapolis,Indiana
Posts: 26
Default Rubber in the original mounts
On original motor mounts would the three bolts , nuts, and spacer tubes be tightened ( tight ) to squeeze it together on the frame or is it just gingerly tightened up so the nut comes up to the cotter pin hole on the bolts ?
I have them gingerly tighten up but i am wondering if this is incorrect.
Thank you
Dave N. is offline   Reply With Quote
Old 09-05-2014, 06:11 PM   #2
Larry Seemann
Senior Member
 
Join Date: May 2010
Location: Spokane, WA.
Posts: 496
Default Re: Rubber in the original mounts
Sponsored Links (Register now to hide all advertisements)
The spacers are there so that you tighten the bolts to the correct spacing.
__________________
Larry Seemann
Larry Seemann is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:26 AM.