The Ford Barn

thirt4 · 09-05-2013, 07:58 PM

I am converting my 1934 Ford 3 window to 12 volt. I am also going to get rid of that darned vacuum wiper.
Is there any company that sells a good 12 volt wiper motor that will fit in behind the visor panel (?) without having to cut a notch out of it? I have seen rodders who have cut that panel out and half of their wiper motor is sticking out looking real bad.
I want to keep the stock look if possible.
And while on the subject... is there a real name for that piece that covers the wiper motor the the visors hang from?

Marvin/TN · 09-05-2013, 11:34 PM

Check with New Port Engineering. Don't know if they make one for a 34 or not. All of theirs are bolt in and fit where the stock wipers were.

Jay in Mass · 09-06-2013, 12:11 AM

Around here, we call it a "Header Panel"

Lawrie · 09-06-2013, 03:27 AM

I got one for my 33 from the mighty wiper company,let me know if you cant find them and I will look up the receipt.
It is nice and small and fits under the header panel easy.
Lawrie

verrece · 09-07-2013, 10:25 PM

Lawrie
Could you please give us the company name and address where you got the wiper that fits under the header panel?.
If you can, give us the model (part number) and please attach some pictures too

mfagan · 09-07-2013, 11:18 PM

Sponsored Links (Register now to hide all advertisements)

http://www.pacificwesterndesign.com/Mighty/

verrece · 09-08-2013, 09:47 PM

Mfagan
Thanks

thirt4 · 09-09-2013, 12:46 PM

Thanks to you all. The help is appreciated.

09-05-2013, 07:58 PM	#1
thirt4 Senior Member Join Date: May 2010 Location: Arizona, USA Posts: 288	1934 Ford windshield wiper I am converting my 1934 Ford 3 window to 12 volt. I am also going to get rid of that darned vacuum wiper. Is there any company that sells a good 12 volt wiper motor that will fit in behind the visor panel (?) without having to cut a notch out of it? I have seen rodders who have cut that panel out and half of their wiper motor is sticking out looking real bad. I want to keep the stock look if possible. And while on the subject... is there a real name for that piece that covers the wiper motor the the visors hang from?

09-05-2013, 11:34 PM	#2
Marvin/TN Senior Member Join Date: May 2010 Location: Chattanooga, TN area Posts: 832	Re: 1934 Ford windshield wiper Check with New Port Engineering. Don't know if they make one for a 34 or not. All of theirs are bolt in and fit where the stock wipers were.

09-06-2013, 12:11 AM	#3
Jay in Mass Senior Member Join Date: May 2010 Location: Mass. Posts: 379	Re: 1934 Ford windshield wiper Around here, we call it a "Header Panel"

09-06-2013, 03:27 AM	#4
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,215	Re: 1934 Ford windshield wiper I got one for my 33 from the mighty wiper company,let me know if you cant find them and I will look up the receipt. It is nice and small and fits under the header panel easy. Lawrie

09-07-2013, 10:25 PM	#5
verrece Senior Member Join Date: Jul 2010 Location: Buenos Aires, Argentina Posts: 129	Re: 1934 Ford windshield wiper Lawrie Could you please give us the company name and address where you got the wiper that fits under the header panel?. If you can, give us the model (part number) and please attach some pictures too Last edited by verrece; 09-07-2013 at 10:44 PM.

09-07-2013, 11:18 PM	#6
mfagan Senior Member Join Date: May 2010 Location: Kaufman, TX Posts: 822	Re: 1934 Ford windshield wiper Sponsored Links (Register now to hide all advertisements) http://www.pacificwesterndesign.com/Mighty/

09-08-2013, 09:47 PM	#7
verrece Senior Member Join Date: Jul 2010 Location: Buenos Aires, Argentina Posts: 129	Re: 1934 Ford windshield wiper Mfagan Thanks

09-09-2013, 12:46 PM	#8
thirt4 Senior Member Join Date: May 2010 Location: Arizona, USA Posts: 288	Re: 1934 Ford windshield wiper Thanks to you all. The help is appreciated.