|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-05-2019, 05:06 PM | #1 |
Member
Join Date: Jun 2010
Location: Glen Gardner, New Jersey
Posts: 57
|
Electronic distributor 47 pickup
I looked back into old posts but haven't seen anything resent on this subject. I am thinking about covering to a
electronic distributor it seems harder to find original compasitors and I am getting older and tired of working on distributor. Any body have good or bad to say on electronic distributors? Who makes a good conversation kit? Thanks, Ron
__________________
Ron |
09-05-2019, 09:51 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 886
|
Re: Electronic distributor 47 pickup
I think Pertronix 12 volt is one of the most suitable , not very sold on the six volt Pertronix, I went back to points ,the points seem to last quite a while ,talk to some of the other Barners on the capacitors.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-05-2019, 11:48 PM | #3 |
Senior Member
|
Re: Electronic distributor 47 pickup
A lot of people going back to points ( ,Cap asters a Model A is good ,the older replacement style with a soldered wire for the A does it for me .I AM at least 15 years on one ,Botch is good ,
|
09-06-2019, 03:23 AM | #4 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: Electronic distributor 47 pickup
Sponsored Links (Register now to hide all advertisements)
The FA54 condensor is a very good unit from NAPA. The pertronixs elec conversion is very good as well [U]IF its 12 volts with a [/U]alternator. The "dirty" generator voltage can cause a problem. I would suggest running the crab as is.... |
|
|
Sponsored Links (Register now to hide all advertisements) |
|