|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-11-2019, 05:02 AM | #1 |
Senior Member
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,611
|
59A Valve Gallery Oil Present.
59A Flathead Engine Standard Bore.
So just pulled off intake manifold to replace sheared generator securing stud. 9/16 UNC. Noted in the valve gallery some oil present? Correct me please if my thoughts or assumptions are wrong. There should not normally be oil present here or not. Oil if here will drain back to oil pan via? This engine has good compressions and good oil presssure. Nil oiling of plugs. However it uses some oil and noted at acceleration. Reported engine has few miles on rebuild. Could this oil in this space be taken into combustion space and burnt via inlet valve guides. The presence of oil in this valve area has me thinking.This area is where the oil is being used as opposed to getting past rings and burning? Thanks for assistance Phil NZ. |
06-11-2019, 05:34 AM | #2 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,750
|
Re: 59A Valve Gallery Oil Present.
There should be plenty of oil or at least signs of oil in that area. It drains back to the crankcase through the holes covered by those shields that clip onto the oil feed tube.
I put a couple of magnets in the little recesses in the middle of that area. Mart. |
Sponsored Links (Register now to hide all advertisements) |
|
06-11-2019, 05:38 AM | #3 | |
Senior Member
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,611
|
Re: 59A Valve Gallery Oil Present.
Quote:
Much appreciated for your clarification. Under the shields for the drains no wonder I did not spot them! Will check again in this area. Phil NZ |
|
06-11-2019, 06:37 AM | #4 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,178
|
Re: 59A Valve Gallery Oil Present.
Interesting idea with the magnet, Mart.
|
06-11-2019, 05:12 PM | #5 |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: 59A Valve Gallery Oil Present.
I know what I'm doing next time my intake is off!
I love breaking open obsolete computer hard drives and getting the magnets out of 'em! Strong as wolverine piss! They will not wander. Now back to the original poster's question. Here's what you DON'T want to find. This was in the '37 block pulled from one of my cars last winter.
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? Last edited by VeryTangled; 06-11-2019 at 05:36 PM. Reason: Added pic, and turn back on topic. |
06-11-2019, 05:34 PM | #6 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,312
|
Re: 59A Valve Gallery Oil Present.
Sponsored Links (Register now to hide all advertisements)
|
06-11-2019, 05:40 PM | #7 | |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: 59A Valve Gallery Oil Present.
Quote:
Sorry back to the original topic! <smacks fingers>
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? |
|
06-11-2019, 07:25 PM | #8 | |
Senior Member
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,611
|
Re: 59A Valve Gallery Oil Present.
Quote:
But will remove inlet manifold again, Remove attached covers on oil line and visually check drain holes are all clear. Then continue with the long term plan of an engine swap and attend to hone, rings and valve guides for oil consumption. Phil NZ |
|
06-12-2019, 09:09 AM | #9 |
Junior Member
Join Date: May 2010
Location: Gary Troxel, Mount Vernon, WA
Posts: 17
|
Re: 59A Valve Gallery Oil Present.
When I was in High School, our Auto Shop teacher told us that is what you get when you use Pennzoil. Gary Troxel [email protected]
|
06-12-2019, 09:14 AM | #10 | |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 59A Valve Gallery Oil Present.
Quote:
|
|
06-13-2019, 01:29 AM | #11 |
Senior Member
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,611
|
Re: 59A Valve Gallery Oil Present.
So today removed inlet manifold to access valve valley area again.Removed covers on oil feed line. All drain holes are clear. Thanks to Mart for info supplied. Will either be nil seals at inlet valves or glazed bore for the cause of my oil usage. This will happen some time!
Phil NZ |
|
|
Sponsored Links (Register now to hide all advertisements) |
|