|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-26-2011, 04:22 PM | #1 |
Senior Member
Join Date: Jul 2010
Location: Parkgate, England
Posts: 106
|
32 Tall water pump pulleys
So today I lost a chunk of one of my pulleys. What are my options? Are new ones available anywhere ?The pumps were done by skip whilst I was on vacation about 5 years ago and work great so I am just looking to replace the pulley.
If new are not available and I can find a later 33-36 pump are the pulleys the same? Tia |
02-26-2011, 04:37 PM | #2 | |
Senior Member
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
|
Re: 32 Tall water pump pulleys
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
02-26-2011, 04:43 PM | #3 |
Senior Member
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,471
|
Re: 32 Tall water pump pulleys
Do you have the chunk? They can be brazed. Send a picture of your pulley to Skip to see if he has one that matches. [email protected] G.M.
__________________
www.fordcollector.com |
02-26-2011, 05:30 PM | #4 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,069
|
Re: 32 Tall water pump pulleys
Gary,
Yes, '32-'36 water pump pulleys are the same (except early '32 pulleys which were shorter from front to back) although some of the pulleys supplied for post-production service were pressed on rather than held in place on the shaft with a tapered pin. Obviously those without the holes for the tapered pin have a slightly smaller inside diameter for a press fit. There were minor differences in the pulleys in terms of casting marks (some have part numbers, some don't) and some NORS pulleys have more pronounced differences in the shape of the front part of the pulley. Dave |
02-26-2011, 08:26 PM | #5 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,017
|
Re: 32 Tall water pump pulleys
Try Fryer's, (909) 335-1418. At one time they were reproducing the tall neck '32 pumps.
Charlie Stephens |
02-26-2011, 09:16 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 642
|
Re: 32 Tall water pump pulleys
Sponsored Links (Register now to hide all advertisements)
|
02-26-2011, 09:19 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 642
|
Re: 32 Tall water pump pulleys
The post should have said -compare with 33 thru 36ss which I also have if that is of any help
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|