|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-05-2017, 12:09 PM | #1 |
Member
Join Date: Aug 2017
Location: Roseville, Ca
Posts: 84
|
Oil Pump for a 226 H Series 6 Cyl Ford
Reaching out
1950 226 H series 6 cyl flathead Ford Business Coupe. Looking for help locating an oil pump, new or rebuilt. Any and all suggestions are greatly appreciated. Marc Mercmarc |
10-05-2017, 01:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,946
|
Re: Oil Pump for a 226 H Series 6 Cyl Ford
Check with Bob Selzan @ "Half Ton Fun" , I purchased a brand new ford pump from him about 15 months ago
Cheers Tony |
Sponsored Links (Register now to hide all advertisements) |
|
10-05-2017, 04:15 PM | #3 |
Member
Join Date: Aug 2017
Location: Roseville, Ca
Posts: 84
|
Re: Oil Pump for a 226 H Series 6 Cyl Ford
Hello KiWinUS
Many thanks and I will give him a call. Thanks again Sincerely Marc |
10-05-2017, 04:42 PM | #4 |
Member
Join Date: Aug 2017
Location: Roseville, Ca
Posts: 84
|
Re: Oil Pump for a 226 H Series 6 Cyl Ford
Hello KiWinUS,
I called Bob at the information below. According to the phone company's automated answer, the number I am calling is no longer in service. Is your contact information the same? Half Ton Fun Bob Selzam 166 Toms River Rd Jackson, NJ 08527 United States 732-928-9421 No email though. Respectfully Marc |
10-05-2017, 08:53 PM | #5 |
Senior Member
Join Date: Nov 2010
Location: NM
Posts: 2,438
|
Re: Oil Pump for a 226 H Series 6 Cyl Ford
Is your existing pump visibly worn? Have you checked the oil pressure relief valve on the side of the block?
__________________
'52 F-1, EAB flathead |
10-05-2017, 11:43 PM | #6 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: Oil Pump for a 226 H Series 6 Cyl Ford
Sponsored Links (Register now to hide all advertisements)
If the axial clearance is to big that can be fixed by surface grinding the pumpbody. If the gears are scored/pitted/rusted you need parts for a rebuild or a new pump. |
10-06-2017, 12:42 AM | #7 |
Member
Join Date: Aug 2017
Location: Roseville, Ca
Posts: 84
|
Re: Oil Pump for a 226 H Series 6 Cyl Ford
Hello Flatheadmurre
(Reaching out, 1950 226 H series 6 cyl flathead Ford Business Coupe. Looking for help locating an oil pump, new or rebuilt. Any and all suggestions are greatly appreciated.) The gears have been replaced and the housing is in good condition, I have resurfaced the face plate. Oil pressure is approximately 50 cold and near 30 when up to temp and idling. We are actually looking for a new or rebuilt one for a spare. Many thanks Marc |
10-06-2017, 01:39 AM | #8 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: Oil Pump for a 226 H Series 6 Cyl Ford
Sounds like you have it up and running good.
Not sure you´re going to need the spare ever... they usually don´t quit in any catastrophic ways. Just keep an eye out and one will show up...probably long before you need it... |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|