The Ford Barn

95476 · 11-21-2021, 09:38 PM

I am going to build the three top loaders I have that are in pieces.
The first one is done.
I acquired a load of NOS trans parts a while back and was looking at them today to grab the parts I need for the builds.
I ran across a few of these and can't ID them.
They are not like thrust washers.
Any ideas ?
Thank you.

Brian · 11-21-2021, 11:52 PM

Plate, B-7129, goes at rear of early style cluster with spur cut 1st and rev gear teeth

mercman from oz · 11-22-2021, 02:18 AM

95476 asks what is this Transmission part ID ?

DavidG · 11-22-2021, 06:45 AM

Brian identified it correctly.

95476 · 11-22-2021, 10:00 AM

Sponsored Links (Register now to hide all advertisements)

Thank you for the ID help. I will tag it in case I need it.

11-21-2021, 11:52 PM	#2
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,834	Re: Transmission part ID Plate, B-7129, goes at rear of early style cluster with spur cut 1st and rev gear teeth __________________ Unfortunately, two half wits don't make a whole wit! Last edited by Brian; 11-21-2021 at 11:58 PM.

11-22-2021, 02:18 AM	#3
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,368	Re: Transmission part ID 95476 asks what is this Transmission part ID ?

11-22-2021, 06:45 AM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: Transmission part ID Brian identified it correctly.

11-22-2021, 10:00 AM	#5
95476 Senior Member Join Date: Jan 2018 Posts: 413	Re: Transmission part ID Sponsored Links (Register now to hide all advertisements) Thank you for the ID help. I will tag it in case I need it.