Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-25-2018, 12:28 PM   #1
dirt t
Senior Member
 
Join Date: May 2010
Location: Kingman,AZ
Posts: 102
Default running board brackets

My son and I are building a 1930 CCPU. We built the frame using different
diagrams available on the net. It was difficult to find correct dimensions.
That's a story in it's self. You would think in modern time there would be an accurate blueprint of a model A frame. Where we need help is the location (elevation) of the running board bracket. Could someone give us the distance from the top of the frame rail to the center of the top mounting hole.
Thank you for your time
Terry aka dirt t
dirt t is offline   Reply With Quote
Old 03-25-2018, 07:42 PM   #2
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 8,480
Default Re: running board brackets

...
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.

Last edited by BRENT in 10-uh-C; 03-26-2018 at 06:05 AM.
BRENT in 10-uh-C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-26-2018, 09:30 AM   #3
Afordman31
Senior Member
 
Afordman31's Avatar
 
Join Date: May 2010
Location: Michigan
Posts: 506
Default Re: running board brackets

Quote:
Originally Posted by dirt t View Post
My son and I are building a 1930 CCPU. We built the frame using different
diagrams available on the net. It was difficult to find correct dimensions.
That's a story in it's self. You would think in modern time there would be an accurate blueprint of a model A frame. Where we need help is the location (elevation) of the running board bracket. Could someone give us the distance from the top of the frame rail to the center of the top mounting hole.
Thank you for your time
Terry aka dirt t
Here's the best I could do with the measurements. This is the location of the rear bracket on the drivers side. I inverted the pictures the second timed I tried to load them and they still post upside down. Download them then rotate them the right side up on your computer. Hope this helps you!
Attached Images
File Type: jpg IMG_3331.jpg (44.1 KB, 22 views)
File Type: jpg IMG_3332.jpg (53.9 KB, 19 views)
File Type: jpg IMG_3333.jpg (54.8 KB, 19 views)
File Type: jpg IMG_3334.jpg (47.1 KB, 14 views)
File Type: jpg IMG_3335.jpg (57.7 KB, 17 views)
Afordman31 is offline   Reply With Quote
Old 03-30-2018, 08:29 AM   #4
dirt t
Senior Member
 
Join Date: May 2010
Location: Kingman,AZ
Posts: 102
Default Re: running board brackets

Thank you .You solved my dilemma.
Terry aka dirt t
dirt t is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:33 AM.