|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-09-2018, 06:49 PM | #1 |
Senior Member
Join Date: Jul 2011
Location: central nj
Posts: 717
|
1960 f-100 steering wheel
I have A 1953 f-100 and a perfect 1960 f-100 custom cab steering wheel, the one with the full horn ring. I have the spring that goes under the horn ring, not sure what else I need,and where to get the parts. If anyone has A 58/60 f-100 custom cab ,they will know what I need. thank you
Last edited by flathead 53; 05-15-2018 at 06:15 PM. |
05-10-2018, 12:13 PM | #2 |
Senior Member
Join Date: Feb 2011
Location: SW WA state.
Posts: 564
|
Re: 1960 f-100 steering wheel
There shouldn't be any spring that goes under the wheel, only under the horn ring. There shouldn't be much difference in the parts and installation between the two wheels, only their appearance.
__________________
1956 Ford Fairlane Town Sedan 292 V8 with Ford-o-Matic |
Sponsored Links (Register now to hide all advertisements) |
|
05-10-2018, 12:15 PM | #3 |
Senior Member
Join Date: May 2010
Location: Rogers, AR, USA
Posts: 141
|
Re: 1960 f-100 steering wheel
Have you tried Sacramento Vintage Ford? They have lots of parts and knowledge about the trucks.
Rob |
05-10-2018, 01:07 PM | #4 |
Junior Member
Join Date: May 2010
Posts: 23
|
Re: 1960 f-100 steering wheel
Keep in mind the '60 wheel is dished and the '53 is not. So using the 60 wheel on the 53 column will put the wheel a couple inches closer to your chest/stomach.
|
05-10-2018, 01:40 PM | #5 |
Senior Member
Join Date: Jul 2011
Location: central nj
Posts: 717
|
Re: 1960 f-100 steering wheel
I also changed the column and box to a 56 f-100, two inches shorter
|
05-10-2018, 04:19 PM | #6 |
Senior Member
Join Date: May 2010
Location: St. Michael, Minnesota
Posts: 1,713
|
Re: 1960 f-100 steering wheel
Sponsored Links (Register now to hide all advertisements)
|
05-13-2018, 10:34 AM | #7 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: 1960 f-100 steering wheel
I don't recall there being a spring under the steering wheel. The steering tube has a "bearing" at the top that is a press fit. The horn ring has a large coil spring between the steering wheel and the horn ring..
I have four '57-60 F series custom cab, and one standard cab steering wheels..
__________________
Bill.... 36 5 win cpe |
05-15-2018, 07:49 AM | #8 |
Senior Member
Join Date: Jun 2012
Location: Gaylord, Michigan
Posts: 1,599
|
Re: 1960 f-100 steering wheel
Use NPD or LMC for all the parts you need. I use LMC the most and very good service.
Mike |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|