|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-01-2013, 05:45 PM | #1 |
Senior Member
Join Date: May 2010
Location: san diego
Posts: 518
|
50 trunk lid rubber placement help
Hi guys . Just recently had the trunk lid of my fifty shoebox upholstered and the weather stripping was damaged so I have to replace it. I bought the correct rubber but I need a pic of which way it goes on as I cannot remember . Which way the rubber glues to the trunk. Any pics would be great... Thanks
__________________
"I have built my organisation on fear"..Al Capone. |
06-01-2013, 07:39 PM | #2 |
Senior Member
Join Date: Mar 2013
Location: Green Bay Wi
Posts: 400
|
Re: 50 trunk lid rubber placement help
i just went and looked at my 50 the v goes to the outside hope this helps
|
Sponsored Links (Register now to hide all advertisements) |
|
06-01-2013, 09:36 PM | #3 |
Senior Member
Join Date: May 2010
Location: san diego
Posts: 518
|
Re: 50 trunk lid rubber placement help
Joe thanks so much for the info
__________________
"I have built my organisation on fear"..Al Capone. |
06-02-2013, 10:26 AM | #4 |
Senior Member
Join Date: May 2010
Location: san diego
Posts: 518
|
Re: 50 trunk lid rubber placement help
anyone have a pic,there is a flat side which to me seems logical to glue to the lid but i maybe wrong
__________________
"I have built my organisation on fear"..Al Capone. |
06-02-2013, 06:58 PM | #5 |
Senior Member
Join Date: Mar 2013
Location: Green Bay Wi
Posts: 400
|
Re: 50 trunk lid rubber placement help
i have glued mine with 3 m black weather strip sealant the flat side goes to the lid the seam always goes to the bottom and also the bottom piece is tight to the flange on the lid wish i could send a pic but im not yet that far along with this tech.
|
06-02-2013, 09:35 PM | #6 |
Junior Member
Join Date: Feb 2012
Location: Detroit/Windsor
Posts: 21
|
Re: 50 trunk lid rubber placement help
Sponsored Links (Register now to hide all advertisements)
|
06-03-2013, 09:00 AM | #7 |
Senior Member
|
Re: 50 trunk lid rubber placement help
This is from Dennis Carpenter website...hope it helps
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|